# Hold down the {VOL -} button ON THE PLASMA.
# At the same time, Press the {Status} button (the button on the left of the 0 (zero) button) on the remote control 3 times. (this must be done within 3 seconds of the {VOL-} button being pressed).
# Release both the {VOL -} button and the {Status} button and wait for about 2 seconds.
# The Service Menu will be displayed.
# Use the RED buttons to move to "SRV-TOOL" screen
and press the {OK} button to access it.
# HIGHLIGHT the box on the right side of the last option: (Navigate by using the arrow buttons on the remote)
_______________________________________
| PTCT :00.00.00.00.00 | HIGHLIGHT HERE |
# Then press and hold the {MUTE} button on the remote for 3 seconds.
TIME = Hours and Minutes of Operation.
COUNT = Times the Plasma was Powered On.
# To exit, press & hold the {Return} button on the Remote for few seconds. The TV will power reset and goes back to the original program that you are watching.