i up-ed both firmware and dsp ah
so everything is lost!!
but i copied down the settings before the upgrade, so is ok! hehe
lemonstar 發表於 2009-4-23 22:15
But if you use Audyssey setup, simply copying speaker distance and level should not enough. Or you are not using MultiEQ in your AMP?
But if you use Audyssey setup, simply copying speaker distance and level should not enough. Or you are not using MultiEQ in your AMP?
alzard 發表於 2009-4-23 22:29
no, i used manual setup, like distance/db level/crossover frequencies
so need to tune again