對onkyo的失望

timehill

ONKYO 建議UPGRADE 時甩開所有HDMI , 當然冇事就冇事，有事就出事
Szelong 發表於 2012-5-21 16:31

    咁onkyo 指引唔係好清楚, 好多人都係睇住個tv入setup做upgrade sw.  開始時都係叫人唔好關機斷電, 完全冇係tv上叫人甩開hdmi ga warning

Szelong

咁onkyo 指引唔係好清楚, 好多人都係睇住個tv入setup做upgrade sw.  開始時都係叫人唔好關機斷電,  ...
timehill 發表於 2012-5-21 17:42

可能因為咁


Precautions for your Firmware Update
Please enter [NET] mode before starting the update.

The firmware update may fail if an external HDMI control signal is input during the update procedure. Please be sure to turn off the HDMI control function (RIHD) on your A/V receiver before starting the update.

How to turn off RIHD:
In the Main menu select "Hardware Setup", then "HDMI".
Set " HDMI Control " to OFF.

- The firmware update should take 15 to 40 minutes (depending on receiver model). Once the update begins, don't turn off the power supply to the A/V receiver until it is time to restart it.

quntinchan

回復 9# indigoxx


    第一次錯就叫做唔識,
    第二次錯就叫做底X死!
    但兩次都係跟足說明做!
La D叫做屎忽痕, La D叫做唔好彩.

其實用落都好滿意, 依家就扣曬分.......................!

quntinchan

可能因為咁


Precautions for your Firmware Update
Please enter [NET] mode before starting the upda ...
Szelong 發表於 2012-5-21 17:44

    多謝! 今次我係用LIN線和跟足指示做, 都係奶左野!

timehill

可能因為咁


Precautions for your Firmware Update
Please enter [NET] mode before starting the upda ...
Szelong 發表於 2012-5-21 17:44

    咁都似啦.....因為我本身都set左off, 所以冇出事

memphis

既然係 software 野，點解 update firmware 個 program 唔識得自動 off 個 hdmi control? 而且佢update firmware 時係可以 check 到自己 hdmi control 未 off, 點解又唔出 warning? 責任好明顯係 onkyo...

quntinchan

我都覺得系Software問題，點都應該5會死缐路版？點解上門無得攪？
真係攞來攪！

timehill

既然係 software 野，點解 update firmware 個 program 唔識得自動 off 個 hdmi control? 而且佢update fir ...
memphis 發表於 2012-5-21 18:18

    Agree!

quntinchan

回復 18# 黑貓

自己整瓜就話人屎
第一次又係咁第二次又係咁
香港地真係咩人都有
-------------------------------------------------------------------
Ching,
你五係批評緊我?
閣下有無睇晒全文呀? 睇D又唔睇D!

mrpost76

回復 4# timehill

I have experience if you don't power down other HDMI device. You will receive Error msg on the update.  I think power down should be ok instead of unplug.