POPCRON C200 死了

cosworth01hk

我部C200都死咗
email過popcorn個cs
但佢叫我試下換個power supply睇睇
証狀如下:
After i unplugged and reboot my c200. It was holding at the loading screen when there's a HDD inside. After i removed the HDD and reboot the C200 again, the power light keep flashing in red and white light. And i also found the led on the mother board inside the C200 also flashing in red and green light.

So, what's the problem with my C200? and can i fix it by myself?

Regards

回覆:

-------------------------------------------
SUPPORT CASE UPDATE NOTIFICATION
-------------------------------------------

Subject : C200 don't work

Status: Open

Case #: 18820

Created: 8/27/2012 9:20:16 PM

Last Updated: 8/27/2012 10:52:10 PM

Product: C-200

--------------------------
Notes:
--------------------------

Could you try to remove any attached device and power it up again? This may due to the internal HDD failing.

If it did not help booting up, the other possible cause may due to a power supply failure.

Since the C-200 use the same power supply as a normal PC ATX chassis, i would recommend you trying out a power supply.

If that resolve the issue, then we are certain that the fault lies with the power supply and you will need to replace it.

billymud

師兄,
1. 量下 +5V and +12V 是否正常先 ??
2. 如果HDD failure, 咁有冇boot s/w 備份 download ??

cosworth01hk

師兄,
1. 量下 +5V and +12V 是否正常先 ??
2. 如果HDD failure, 咁有冇boot s/w 備份 download ?? ...
billymud 發表於 2012-8-29 13:46

1. 手頭上無儀器又無呢方面知識所以無得搞
2. 未試拔jumper reset firmware, 希望救得返啦

billymud

回復 63# cosworth01hk

no instrument, 咁用手摸, 開机有冇感覺 HDD 行緊....if it does, +12V should be right.
if console control and display normal, +5V should be ok.

cosworth01hk

回復  cosworth01hk

no instrument, 咁用手摸, 開机有冇感覺 HDD 行緊....if it does, +12V should be ri ...
billymud 發表於 2012-8-29 14:08

Thanks for your info
今晚返屋企試試先

簡單咁講係咪5同12v都無問題的話就即是power supply無問題?

billymud

回復 65# cosworth01hk


    簡單咁講係5同12v都無問題的話, 就即是可能 HDD / firmware 有問題
若係5v or 12v 士旦一組出問題的話, 就即是power supply module 問題
5同12v都無問題的話, 就即是MAIN power supply (module)無問題.(.因 未能完全涵蓋 on-board requlations).
以上只係quick and dirty check ! ....may 60~70% 找定死症範圍 的了!

cosworth01hk

回復  cosworth01hk


    簡單咁講係5同12v都無問題的話, 就即是可能 HDD / firmware 有問題
若係5v or  ...
billymud 發表於 2012-8-29 15:21

終於搵到死亡原因
係Power supply出問題
結果換過隻PSU之後
而家部C200又精精神神喇

billymud

回復 67# cosworth01hk


    夠嗮叻喇、你！

Szelong

終於搵到死亡原因
係Power supply出問題
結果換過隻PSU之後
而家部C200又精精神神喇 ...
cosworth01hk 發表於 2012-8-31 15:19

    保養期內定係自費換呀？

cosworth01hk

保養期內定係自費換呀？
Szelong 發表於 2012-8-31 17:03

自費
$27 USD