AV rack

beerboy

回復  beerboy

I know ar, but H6 is good?
liclic 發表於 2012-4-10 00:49

    我收貨架。不過有d ching可能嫌佢太高，我就岩岩好。taoc我就有d覺得太貴。

liclic

回復 11# beerboy


    TACO afford 唔到啦, SS H6 is 6k something, the price can afford.

beerboy

回復  beerboy


    TACO afford 唔到啦, SS H6 is 6k something, the price can afford.
liclic 發表於 2012-4-10 01:00

    係呀。我因為多左玩具，入埋隻h6 partner。

!替天行道!

我收貨架。不過有d ching可能嫌佢太高，我就岩岩好。taoc我就有d覺得太貴。 ...
beerboy 發表於 2012-4-10 00:53

h6 is good height, however 6.3 is a bit too tall for a 3 tier rack.

personally, i will not buy 5 series, go for 6 series if space is allowed.

tomohiro

剛買norstone~因為老闆同我都鍾意個款~~

!替天行道!

回復  beerboy


    TACO afford 唔到啦, SS H6 is 6k something, the price can afford.
liclic 發表於 2012-4-10 01:00

if you see their MSR, LSR series, they are very much affordable. However, MSR is just a piece of MDF board, LSR is a sandwich board. ASR is a completely different grade. so if buying TAOC, I think ASR is minimum.

the down side of solidsteel is you need to change the whole complete rack if you need to change height, but with TAOC you can buy different heights. Dont be tricked by look of TAOC, it does not look so professional as the European stacks, TAOC lives a Japanese life and if you look at their design, it is like IKEA or Muji furnitures, however they offer you the same sturdiness and firmness that any heavy steel offers.

beerboy

h6 is good height, however 6.3 is a bit too tall for a 3 tier rack.

personally, i will not buy 5 se ...
!替天行道! 發表於 2012-4-10 01:33

    係呀。5仔有d到侯唔到肺。

patrick12345

剛買norstone~因為老闆同我都鍾意個款~~
tomohiro 發表於 2012-4-10 01:40

可否分享一下最後選了邊款丫？

liclic

回復 16# !替天行道!

TAOC 我見最平都要一萬... 那一個series 係入門?

samul

剛買norstone~因為老闆同我都鍾意個款~~
tomohiro 發表於 2012-4-10 01:40

    norstone 甘貴....吾值LAW....其實距都吾係外國牌子..其實就係本地炸...都係..係大陸做..