請問問師兄JVC X70 應用什麼吊架？那處買到？

gikifk

回復 4# snakejoe


    師兄你個架唔係50果個？

snakejoe

係啊, 其實深水埗有賣, 不過就要 hk$200

但有樣要注意就係個架幾長下, 如果你部機要盡量貼墻o既話,
咁吊o既位未必係部機o既重心度, 就會頭輕尾重,我o既情況就係咁.

解決方法就係校好大概o既位, 跟住用粗o的o既索帶固定.
我幅圖你留心下就會見到o的索帶.
另一個方法就係自己鋸短佢.

breadvan

Hi breadvan,

I am very pleased to meet you in this website.  I am JJY in Avbuzz.  You recommended P ...
yhm88 發表於 2012-3-13 16:55

Great stuff, I am glad you got the PJ, have you checked for any issues like convergence?  With pixel alignment on the X70 it should be very simple to check and adjust. I almost bought from them too but then I got some special price on my 30 so I considered the difference to be not worth my lazy butt effort.  I am very happy you had a pleasant purchase experience.  Hey with all the $$ you saved, may be allow me to visit you one day !  

X70 is close to 35 pounds so be careful to go with a quality mount, buy a good one la since your PJ is $$$!  The required mounting arm is also quite long compare to others, so it might be a bit tricky, but there are other ching on this or other local forums using the 70 or 90 so I am sure they can help you with mount, as for me, I use a PJ elevator so my solution is different.  I did look at Chief and other US based mount but they are mostly hard to get.

How big is your screen and gain, distance from screen?  Feel free to PM me to share experience.

Enjoy your new toy!

yhm88

回復 13# breadvan


Hi Breadvan,

收到台機後，只是拆開盒，試過燈可以著，就沒有檢查其它，你說應檢查什麼好，請指教。
星期六先有時間將台X70搬回家，看了套3D"魔盜王"，什麼都沒有調教，我用70" grayhawk距離14'，
畫面都夠光，3D真的有驚起！畫面很細緻、對比強，3D好有現場感，可能少看3D，甚至覺得X70的3D靚過2D，
一看難忘！

原來我的PHILIPS TV 3D眼鏡可以用在JVC projector上，好彩只買了二副JVC眼鏡。

2D方面，尚未找到開關e-shift功能，奇怪，說明書沒有提到e-shift功能！要研究下。

我翻查之前post, 知道你都試過用阿膠力膠板造架，是否成功？看來都是要自制一個吊架！

gikifk

係啊, 其實深水埗有賣, 不過就要 hk$200

但有樣要注意就係個架幾長下, 如果你部機要盡量貼墻o既話,
咁吊o ...
snakejoe 發表於 2012-3-15 10:46

我個架未裝前覺得好靚，裝好後才知會出現少少虛位