DVD Player: Denon DVD-3930/2930 2008 Firmware (Update DVD-2930)
2930 Firmwarelink#1
http://rapidshare.de/files/39381011/GEN8283C_111_DVD2930CI_2930.zip.html
link#2
http://rapidshare.de/files/39381044/GEN8283C_111_DVD2930CI_2930.zip.html
link#3
http://www.megaupload.com/?d=VIS7087L
3930 Firmware:
http://rapidshare.com/files/103009176/GEN8284-8_111_DVD-3930CI_and_DVD-3930.zip
========================================================================
Here the changelog from the past firmware versions. (3930)
22.02.2008
8284-8
* improvemnet of the regulary playing performance (random mode)
the playback of curving Disc is difficult occasionally.
21.11.2007
8284-7
* when "Track Skip Fwd/Rev" button is pushed early two times or more when the CD-DA disc is PAUSE, "Play" button is not accepted;
the repeat function was turned on when the SACD disc had stopped and it played, or the SACD disc is played by the All Repeat function. Afterwards, the repeat function doesn't operate when stopping and playing.
* improvement of DVD-AUDIO playback.
* AC-3 protected with CSS is converted in PCM and the SPDIF digital outputs are 24 bits.
* When the equipment of the non-certificated HDCP output of TV is connected with the DVD player, the picture is output.
improvement of picture adjustment function
25.07.2007
8284-6
* improvement of CD playback via HDMI.
04.04.2007
8284-5
* improvement of remote control sensor.
* fixing of memory capabilities.
15.01.2007
8284-3
* general improvement of playback, improvement of compatibility to not standard conformed CD's.
* Improvement of CD playback with "Copy-Control" (CCCD)
15.12.2006
8284-2
* elimination of sound interrupts between track when specified "DVD-AUDIO-DISC"
[ 本帖最後由 yuppi 於 2008-11-16 11:13 編輯 ] Thank for your Info ....
Pioneer DVD? 原帖由 wil-wil 於 2008-11-12 02:43 發表 http://www.post76.com/discuss/images/common/back.gif
Thank for your Info ....
Pioneer DVD?
dvd-3930 係你最愛嘅 denon Smilies005
http://denon.jp/products2/dvd3930.html
[ 本帖最後由 mankoo 於 2008-11-12 02:51 編輯 ] Thanks ...
原帖由 mankoo 於 2008-11-12 02:45 發表 http://www.post76.com/discuss/images/common/back.gif
no 喇！dvd-3930 係你最愛嘅 denon Smilies005 加入 DVD-2930 firmware mankoo 兄:
gogogo Thanks for your support again!
原帖由 yuppi 於 2008-11-16 09:45 發表 http://www.post76.com/discuss/images/common/back.gif
加入 DVD-2930 firmware yuppi / wil , dvd-2930 用什麼方法 update ?
update 完有什麼好處呢 ? Smilies009
[ 本帖最後由 mankoo 於 2008-11-17 18:11 編輯 ] 我相信呢部機只係 bug fixing 之類，
因為早期 DVD+R/DVD-R/DVD RW/VR 既融合都出現幾大差異。
加上如果部機係影音性能上升級得大完美，
就唔會咁快再又人換機住，
所以都唔好太奢望有什麼重大變更。
再講，以 Denon 既手法，
如果影音性能上提升較多、較全面，
點會唔收錢!
呢部機應該都係將個檔案燒落隻碟到，
之後就揀 manual 內升級功能之類，
如果有 USB 位都可能可以經佢做。
詳情要睇番說明書先知，
網上應該有機器會搵到。
原始短消息: 2930 掂樣 update ?
原帖由 mankoo 於 2008-11-17 18:03 發表 http://www.post76.com/discuss/images/common/back.gif
yuppi / wil , dvd-2930 用什麼方法 update ?
update 完有什麼好處呢 ? Smilies009 原帖由 mankoo 於 2008-11-17 18:03 發表 http://www.post76.com/discuss/images/common/back.gif
yuppi / wil , dvd-2930 用什麼方法 update ?
update 完有什麼好處呢 ? Smilies009
update 完改善 SACD
Check VersionSmilies010
Remove any disk from the player and close drawer do not put player into standby.
Turn the player off using the small power button.
Turn the player on while at the same time pressing both " PLAY " and "OPEN/CLOSE" at the front of the player. Keep these buttons depressed till OPEN appears on the display. then on the remote control press in sequence "3" "2" "6" "5". Then on the remote control press "MENU" repeatedly to read out firmware version.
=========================================================================
Update 吾駛兩分鐘Smilies011
1. Turn on the player with the small On/Off button while simultaneously pressing the PLAY and SKIP FORWARD buttons. The display should now say INITIALIZE.
2. Open the DVD tray and insert the CDR containing the new firmware and close. The update should start automatically.
3. The display will show a sequence of reading the disc, erasing the existing firmware, writing the new firmware, and then verifying the new firmware. This process may take several minutes. Be patient. When the display says COMPLETE, the tray will open automatically.
4. Remove the CDR, BUT DO NOT CLOSE THE TRAY.
5. Turn off the player with the small On/Off button.
6. Turn on the player with the small On/Off button while simultaneously pressing the PLAY and SKIP FORWARD buttons.
7. The player should say INITIALIZE again.
8. Turn off the player again with the small On/Off button.
9. Finally, turn the player on with the small On/Off button and set up the player with your custom settings.
[ 本帖最後由 yuppi 於 2008-11-17 21:54 編輯 ]
頁:
[1]
2