冇理由會差左, 我以前都係av amp 用rca pre out去naim5i, 升左級之後av amp rca to din去122, d聲冇受影響。
你呢條線係秋記造, 應該就係我用緊係3.5 to din果條, 我用來插ipod去122, d聲唔錯架。
回復 9# yeungone
條線有D問題? The cable is Made In Germany, maybe its too narrow?
線材 μf 值唔正確? What is μf 值?
焊接得唔好? Should be OK
Actually I dont know much about cable......
回復 10# Big_McIn
Hi buddy,
Thanks again for your great help!
+++++++++++++++++++++++++++++++++++
唔知你用乜AV Processor，正常XS NAIT 上202+200無理由差咗。<---I am using Onkyo 5507
因合併和前後級靈敏度不同，以前接XS NAIT用乜接？怎樣接？<---I used XLR > RCA on my NAIM NAIT XS b4. The sound was great!!!
RCA/XLR和 DIN/XLR原理一樣，只不過一粒DIN = 两粒RCA。<---I see
AV Setting要重新再做。<--- I at the very beginning used RCA > RCA from 5507 to NAIT XS. Result was good. Then changed to XLR > RCA to my NAIT XS, whithout any re-setting, result was better. Then now changed to XLR > DIN because of my 202, 200 AV Bypass, however, result is not good, bass is less, not so powerful, I dont know why. Maybe I need to use the original NAIM RCA > DIN cable for best result?
I wanna know after changed to 202, 200, the result should be better, right? Louder? More powerful? More detail?
回復 11# PP-HK
Hi pal,
升左級之後av amp rca to din去122, d聲冇受影響。<----d聲冇受影響? You mean no difference?
你呢條線係秋記造, 應該就係我用緊係3.5 to din果條, 我用來插ipod去122, d聲唔錯架。<----my cable is Made in Germany, HK$20/foot, grey, quite narrow.
用係AV度d聲變化不大, 當然2 channel就完全係兩個境界。條線加左咁多價呀, 我果時好似係10/呎。
我最後用返 NAIM 條原裝 2RCA > 5DIN 條 CABLE.
感覺:
1) D BASS 好重好實, 我好 LIKE, 聽 T4 D 配樂 D BASS 好勁好沉實, 聽 RAMBO 4 主角用箭殺人果段, 當 D 箭插落人個身時好有力, D BASS 好0岩聽, 同之前無0西 BASS 真係兩個世界
2) RAMBO 4 主角用刀斬頭時, D 刀0既金屬聲同回音, 我好 LIKE
3) 看冬蔭公 DVD 時, MENU 0既背景音樂 D BASS 而家返返0黎喇
之前唸住平, 用 $500 做條 DIY XLR > DIN, 點知兜兜轉轉又係用返 NAIM 原廠線. 其實前置對電影效果都好緊要, 可以將成個音場帶起呀
本帖最後由 Big_McIn 於 2011-5-14 15:58 編輯
Then now changed to XLR > DIN because of my 202, 200 AV Bypass, however, result is not good, bass is less, not so powerful, I dont know why. Maybe I need to use the original NAIM RCA > DIN cable for best result?
...
Jackiewakusome 發表於 2011-5-13 17:53 http://www.post76.com/discuss/images/common/back.gif
可能性：
秋記亞姐搞錯+ve x 2 和 -ve x 1與XLR (+) (-) (G)的關係。
其實DIN只有5針，可以原裝線作比對，check check +ve, Ch1 In(L),-ve, Ch2 In(R), +ve各針與L/R RCA插關係，然後改駁上XLR，亦可買两粒RCA>>XLR Adapter來跟正腳位，最大機會出錯是+ve和-ve。
否則就是DIN >> XLR 和 DIN >> RCA Impedance不同，咁就無得搞。
不過，5507並非行balance設計，只內置unbalance >> Balance切換線路板，既然Naim不設Balance IN，只用DIN，RCA出再入DIN重直接哩。
回復 17# Big_McIn
hi pal,
Yeah, I have asked Michael's Audio, they said maybe the master in Akihabara has reversed the +ve or -ve. Anyway, my problems have been solved, thanks again for your comprehensive explanation!
我好想知條 XLR -> DIN 整左幾錢?
回復 19# ivanyiu
唔记得喇，$3XX.
你有无兴趣？
