咁有冇CHING知P記係點SET呢個分唇呀
我用先鋒81做前級,今朝收貨岩岩setup好晒用12V線可以連動到部後級啟動但係.......當轉input時會搞到部後級 ...
xlarge 發表於 2010-8-21 14:12 http://www.post76.com/discuss/images/common/back.gif
咁即係有冇得攪呢,,定都係要分開前後級ON/OFF
回復 47# vko99
我連用 MTV 轉台都死, 莫講話轉 LISTEN MODE
回復 55# doublez
I also did some testing.
1. Check all connections are okay or not, then power on, but it still fails (same Ch 1 & Ch 2 flashes).
2. I unplug all RCA and speaker wire and then plug in again. I tested but it still failed. Same Ch 1 & Ch 2 flashes.
3. I then swap Ch 1 and Ch 2 with Ch 3 and Ch 4. Then I tested again. This time Ch 5 flashes.
4. I tried a different power source for the XPA-5 and checked the Ch 5 connection again. Then I tested again. But this time Ch 1 and Ch 3 flashes.
There seems to be some problem with my unit. Does any C-hing have any input to me ?
駁好晒D野喇
準備做 setup
但發現個 12V Trigger 唔 work
我用 807
將部 807 轉做 standby 同 poweroff 部...
聖龍 發表於 2010-8-21 13:33 http://www.post76.com/discuss/images/common/back.gif
本人用Onkyo 705 駁 XPA-5近半年,由於Onkyo的12V Trigger主要係比Zone 2用,所以用嚟控制Power Amp唔係好,我初用時都發覺唔好用,又要轉Zone 2..., 後來打開部705的外殼, 係入面駁條12V去Trigger 部XPA-5, 效果非常好, 到現在都非常滿意, ON/OFF得心應手. 其他牌子的AV Amp本人就唔知喇.
本人用Onkyo 705 駁 XPA-5近半年,由於Onkyo的12V Trigger主要係比Zone 2用,所以用嚟控制Power Amp唔係好 ...
hklin 發表於 2010-8-21 15:44 http://www.post76.com/discuss/images/common/back.gif
多謝師兄資料
請問有無圖睇下
同埋駁入去部Amp入面邊條線做 trigger ?
多謝師兄資料
請問有無圖睇下
同埋駁入去部Amp入面邊條線做 trigger ?
聖龍 發表於 2010-8-21 16:27 http://www.post76.com/discuss/images/common/back.gif
我是在705的RS232 Socket 底板的12V, 由那處的12V直接去Trigger XPA-5 的ON/OFF, 因這個12V是跟705的Power On/Off, 即705 On 就有12V 出, 如果705 關机就冇12V出, 所以能做XPA-5 的12V Trigger.
我用先鋒81做前級,今朝收貨岩岩setup好晒用12V線可以連動到部後級啟動但係.......當轉input時會搞到部後級 ...
xlarge 發表於 2010-8-21 14:12 http://www.post76.com/discuss/images/common/back.gif
You have to set every input using 12v trigger not only one input
我是在705的RS232 Socket 底板的12V, 由那處的12V直接去Trigger XPA-5 的ON/OFF, 因這個12V是跟705的Powe ...
hklin 發表於 2010-8-21 16:53 http://www.post76.com/discuss/images/common/back.gif
Thx hklin 兄, 等我返去望下先 ^0^
onkyo 5007.how to set 12v trigger please.{:1_251:}
