hooh
發表於 2010-8-23 10:51
小瑟兄,提提你吾好吾記得我呀vko99,我部機都有問題玩吾到。謝!
vko99 發表於 2010-8-23 10:49 http://www.post76.com/discuss/images/common/back.gif
ching妳部有咩問題
小瑟
發表於 2010-8-23 11:15
好, 拿不如咁, 大家如果囉左部機之後, 有問題既, 麻煩係度報告返個問題, 我一次過EMAIL比美國果邊跟進.
大家請係8月24日星期二6:00PM前報告, 等我地星期二晚可以EMAIL比美國方面跟進!!!
THX!!!
1.
網名:
問題狀態:
機身編號:
2.
網名:
問題狀態:
機身編號:
3.
網名:
問題狀態:
機身編號:
4.
網名:
問題狀態:
機身編號:
hooh
發表於 2010-8-23 11:24
好, 拿不如咁, 大家如果囉左部機之後, 有問題既, 麻煩係度報告返個問題, 我一次過EMAIL比美國果邊跟進.
大家請係8月24日星期二6:00PM前報告, 等我地星期二晚可以EMAIL比美國方面跟進!!!
THX!!!
1.
網名:hooh
問題狀態: ch 3 led 唔著
機身編號: 後補
2.
網名:
問題狀態:
機身編號:
vko99
發表於 2010-8-23 11:50
網名: vko99
問題狀態: 如下
1. Initial working was okay but after 2 mins, Ch 1 & Ch3 red LED are on and no sound.
2. Check all connections are okay or not, then power on, but it still fails.
3. I unplug all RCA and speaker wire and then plug in again. I tested but it still failed. Same Ch 1 & Ch 2 flashes.
4. I then swap Ch 1 and Ch 2 with Ch 3 and Ch 4. Then I tested again. This time Ch 5 flashes.
5. I tried a different power source for the XPA-5 and checked the Ch 5 connection again. Then I tested again. But this time Ch 1 and Ch 3 flashes.
Cannot identify the single problem.
機身MODEL:後補
小瑟
發表於 2010-8-23 14:40
好, 呢二個CASE我就今晚EMAIL同美國果邊講左先!!
MANY THX!!
1.
網名:hooh
問題狀態: ch 3 led 唔著
機身編號: 後補
2.
網名: vko99
問題狀態: 如下
1. Initial working was okay but after 2 mins, Ch 1 & Ch3 red LED are on and no sound.
2. Check all connections are okay or not, then power on, but it still fails.
3. I unplug all RCA and speaker wire and then plug in again. I tested but it still failed. Same Ch 1 & Ch 2 flashes.
4. I then swap Ch 1 and Ch 2 with Ch 3 and Ch 4. Then I tested again. This time Ch 5 flashes.
5. I tried a different power source for the XPA-5 and checked the Ch 5 connection again. Then I tested again. But this time Ch 1 and Ch 3 flashes.
Cannot identify the single problem.
機身編號:後補
小瑟
發表於 2010-8-23 14:59
hooh, vko99兄, 你地都係PM我機身編號啦~~
MANY THX~~~
hooh
發表於 2010-8-23 23:04
還樹都冇機換,,,就再整d野,幫部機扮下靚,,
非一般的黑魂
聖龍
發表於 2010-8-23 23:23
想問下師兄們 4RU 有無螺絲批跟埋架?
KEI
發表於 2010-8-23 23:25
仲未得閒搞機...好忙...星期二前要報告...唔瞓都要搞吓先得{:6_243:}
micma
發表於 2010-8-23 23:28
想問下師兄們 4RU 有無螺絲批跟埋架?
聖龍 發表於 2010-8-23 23:23 http://www.post76.com/discuss/images/common/back.gif
冇ga...{:6_140:}
頁:
1
2
3
4
5
6
7
8
9
10
[11]
12