點解有d Subwoofer線係一開二?
Thanks!{:6_183:} 因為有些SUB WOOFER有兩個入口Jeff.C.Y 發表於 2010-7-2 15:00 http://www.post76.com/discuss/images/common/back.gif
師兄答得好好 {:6_198:} {:6_208:} 答得好{:6_197:}
我個個有4個入口...但都係插LF個個位...{:6_141:} 因為可以收貴D掛{:6_141:} From SUNFIRE manual
These connect with RCA type cables
from the line-level outputs of your
receiver or preamp. Here are two
examples:
If your processor or receiver has a
single subwoofer output, connect it
to the subwoofer’s left input jack (see
page 11). There is no need to use the
subwoofer’s right input jack.
If your processor does not have a
subwoofer output, use “Y” adapters at
the processor outputs (see page 12). In
this way, you can send the processor’s
full-range output signals to your main
amplifier and to the subwoofer at the
same time. O ic.
Thanks 聖龍, Jeff.C.Y. O ic.
Thanks 聖龍, Jeff.C.Y.
itoy2008 發表於 2010-7-2 17:41 http://www.post76.com/discuss/images/common/back.gif
睇 manual 第11同12頁你就會明
http://www.sunfire.com/manuals/HRS_manual_revB.pdf 回復 6# Jeff.C.Y
我同你一樣，插晒佢兩個洞{:6_176:} 事實麻, 呵呵
4個入口? 我都有4個LF洞, 但係就2入, 2出, 我那隻本身是5.1套裝中的垃圾十仔... ...
Jeff.C.Y 發表於 2010-7-2 17:33 http://www.post76.com/discuss/images/common/back.gif
禾部KEF都好垃圾,都有兩個洞,自己念著一個洞已好吃力咁就插一個,{:6_122:} ,點知KEF維修部位伯伯千訂萬祝叫我插晒兩個,距話咁樣好D喎{:6_141:} .師兄就好啦,有心有力{:6_193:} 我都係用kef sub仔,咁我部amp有兩個sub out,可否用兩條cable一條駁去sub L,另一條駁去sub R架?
頁:
[1]
2