師兄幾時加相呀!大大大大大大變身.......待續
回復 78# tommychan1021
你借錢俾我咪可大變身囉{:6_176:}
本帖最後由 ocicattt 於 2010-8-3 15:33 編輯
回復ocicattt
Onkyo 608 + Louis , to improve 力量
Mirage MM6 sub + Louis , to improve 力量
Accupha ...
fuman0123 發表於 2010-8-2 23:41 http://www.post76.com/discuss/images/common/back.gif
Thx for ur reply.
The Northwire + Ortofon電源線 tour have very affordable price, but I need to wait for next tour.
I will consider SINE cables, look for 2nd hand first.
For power bar, SA - 5 Silver Cryo does not include cable right? Need to buy a Louis for it?
If I decide to have 瀘波，any cheaper recommendation? (I saw a Monster Power 1000 yesterday ~$1800, good?)
2 more questions: {:1_260:}
- My Onkyo 608 power cord is not easily changeable, saw other cHing DIY cut it off and insert a IEC male plug. But doing that, the new power cord will be connected to a portion of "chicken" wire, then to the transformer. Is it better to somehow open up the amp and connect directly inside??
- Some ppl say that amps should connect to Bypass plug of 瀘波 power bar, because it's better. What's wrong with using filtered clean power in amps ??
大躍進，正{:6_182:}
回復 81# wiiwiiiloveu
躍進一定有{:6_190:}
不過銀包就大縮水{:6_147:}
本帖最後由 fuman0123 於 2010-8-5 08:59 編輯
回復 80# ocicattt
Northwire+Ortofon電源線質素ok既，如果你覺得價錢合理都可以放心去買。
另外你話會考慮SINE既線材，不過以二手為先？，但我係市場上好少見到，你亦都可以搜尋一下。
SINE SA-5排插係唔跟電源線，你要另買給它。
如果你想有濾波功能？你見到果隻Monster Power 1000都OK,因為我有兩個朋友都用緊，但你想要再平宜一點可考慮國內大牌子：隆宇既濾波拖排。
另外你話見到某師兄張部Amp既尾部電源線改為可換線的IEC尾插，而這樣做，需要一定知識同技術，我不建議你咁做。
而一般濾波拖排，只適合你插一d細電流既機，例如：CD/DVD/blu-ray/前級or解碼......等等！
而Amp係屬於大電流產品，如插濾波果組，有可能會被cut高cut低，即係削弱了高頻同低頻，除非你用d重型濾波就可以直插濾波果組，
因為它們用大形呃流圈，但往往呢類產品都叫價甚貴，約7000至幾萬不等當然重有貴d啦！
http://www.post76.com/discuss/viewthread.php?tid=27257&from=favorites
想清楚d就睇睇：
回復 83# fuman0123
Thx cHing, the article is very helpful.
So if I buy SINE-SAF-30A or PS Audio Quintet Power Center or cheaper Monster Power 1000, I still need to plug to by-pass for my amps right? (without knowing the technology they use, for this price range I assume they only use 磁環/電容/線圈 filter)
And CD, BD player plug to "dignital";
LCD TV, subwoofer plug to "anolog" ?
If I DIY power cord change for my 608 like this cHing:
http://www.post76.com/discuss/viewthread.php?tid=14223&highlight=
This method is not hard, but the portion of leftover original cable will waste the flow of strong power from a Louis cord right?
本帖最後由 fuman0123 於 2010-8-6 07:58 編輯
回復 84# ocicattt
如果你買有濾波作用o既排插？你係仍然要張部Amp插去by-pass果組。你睇過我俾你睇果條Link啦？應該對濾波有更深了解！
其實無須太介懷部Amp係咪一定要經過濾波，因為方間大部份發燒友運用濾波時，都只係用黎接駁CD/DVD/blu-ray/前級同解碼居多，擴音部份極限只插by-pass(包括我在內），尢其後級大多只直駁牆身插座，因為後級電流量大，有部份排插都未能供給足夠電流給它。
另外你如購買有濾波排插？應如何接駁？例子：買以SINE 30A咁計，你應將CD/BD直插Digital而LCD TV/DVD/機頂盒/PS3....等等都插去anolog，最後將Amp直插by-pass，到超低音，呢個好緊要，應將它插去與音響無關的插座上取電，因為超低音內的擴音組件多數係用D類放大有部份甚至更差，失真又大的功率來處理並帶來大量Noise，如插去音響果part取電，會直接影響套音響表現另其衰聲，呢part相信好多人都未必知，係一個玩電o既知心發燒友過料俾我，而咁橋我去買濾波o既老闆都不約而同講出同一番道理。真係不到你不信！
另你提到有師兄用呢個方法換尾插，我個人都有少少保留，咁做係會有改善，但唔夠徹底，始終有個樽頸位，好處就係易整，又可換到線，如可改機箱直接駁到取電位效果會更完美。
到去幾時有時間倫到我去你家見色一下.
回復 86# kenny238
我同你果套差幾班!!!
我預計會加投影，到時請你嚟向你取經{:6_138:}
