求教!! 想玩room eq但cal唔到張usb sound card
自問已經爬左所有既關於room eq 既文章, BUT CAL SOUND CARD 有問題,想請教各師兄,睇下有冇人用緊同一款SOUND CARD
1. USB SOUND CARD 3.5MM 插頭CAL 既時應該插邊2個孔??
http://i68.photobucket.com/albums/i34/duedueb/IMG_0725.jpg
2. ROOM WIZARD 入面 MEASURE 後ADJUST 右面既BAR 用 USB SOUND CARD 既SOFTWARE 應ADJUST 邊PART??
http://i68.photobucket.com/albums/i34/duedueb/IMG_0726.jpg
3. DEFAULT DEVICE 要唔要CHOOSE USB SOUNDＣＡＲＤ DEVICE呢??
http://i68.photobucket.com/albums/i34/duedueb/IMG_0727.jpg
4. 已試過反覆N禁多次, BUT 最後都話我VOLUME過大, CAL 唔到...........
已試過可ADJUST 右邊既BAR LEVEL 差唔多,但FINAL 都話我VOL 過大, 呢個問題已玩左我成晚.......請ROOM EQ高人指點 點解冇line out ? 係呀,就係唔明, but 有版友都係買呢隻玩room eq, 搵人幫下手呀,,,,,,, i use my labtop for REQ.
plug mic -> mic in
front out(i think it is stero) ->RCA -> amp
but i am not quite sure
you can try try sin! SPL Meter > Line In
Front Out > Amplifer
Q3:You can choose USB Sound Card Device and Check "Control output mixer volume" / "Control input mixer volume" boxes.Then run sound card calibration.
Q4: Which screen you got reported level too high?You can always lower the dbFS in measure until "Headroom" in green before measurement. thx alzard兄, 我重以為cal 張sound card 係唔洗用spl meter...........
我試下先, thanks 本帖最後由 alzard 於 2010-1-29 00:07 編輯
thx alzard兄, 我重以為cal 張sound card 係唔洗用spl meter...........
我試下先, thanks
KEVIN9178 發表於 2010-1-29 00:02 http://www.post76.com/discuss/images/common/back.gif
No no no.Calibrate sound card need to connect line out to line in.:)Then use the RoomEQ to control the level of line in until their levels match.
Sorry for misleading... {:1_332:} 就係cal sound card 出問題, 唔知插邊個孔至arm...... 就係cal sound card 出問題, 唔知插邊個孔至arm......
KEVIN9178 發表於 2010-1-29 01:57 http://www.post76.com/discuss/images/common/back.gif
試完都係唔得? 就咁望Line in > Front Out
頁:
[1]
2