Einstein 發表於 2009-9-6 15:27

Yamaha AV amp Parametric EQ

本帖最後由 Einstein 於 2009-9-6 18:24 編輯

Yamaha AV amp Parametric EQ
多謝近排好多師兄對EQ的無私分享, 又有pepsiman的圖文分享, 小弟又中毒, 馬上抓書試玩, 分享下唔好見笑, 多多指教:
以下是分段主攻:
Effects of Equalization on Vocals
For the best control over any audio signal, fully parametric EQ's are the best way to go.
80 to 125 , 160 to 250, 315 to 500
Sense of power in some outstanding bass singers.
Voice fundamentals
Important to voice quality

630 to 1K
Important for a natural sound. Too much boost in the

315 to 1K
range produces a honky, telephone-like quality.

1.25 to 4K , 5 to 8K
Accentuation of vocals

40Hz to 70Hz
These frequencies give music a sense of power. If over emphasized they can make things muddy and dull. Will also cloudy up some harmonic content.

80Hz to 125Hz
Too much in this area produces excessive 'boom'.

160Hz to 250Hz
This is the problem area of a lot of mixes. To much of this area can take away from the power of a mix but is still needed for warmth. 160Hz is a pet-peeve frequency of mine. Also, the fundamental of bass guitar and other bass instruments sit here.

300Hz to 500Hz
Fundamentals of string and percussion instruments.

400Hz to 1K
Fundamentals and harmonics of strings, keyboards and percussion. This is probably the most important area when trying to control or shape to a natural sound. The 'voice' of an instrument is in the mids.

To much in this area can make instruments sound horn-like.

800Hz to 4K
This is a good range to accentuate instruments or warm them up. Too much in this area can produce 'listening fatigue'. Boosts in the 1K to 2K range can make instruments sound tinny.

4K to 10K
Accentuation of percussion, cymbals, and snare drum.

Playing with 5K makes the overall sound more distant or transparent.

8K to 20K
This area is often what defines the quality of a recording or mix. This area can also help define depth and 'air' to mix. Too much can take away from the natural sense of a mix by becoming shrill and brittle.

EQ setting of AV amp is vey important

與之前及其它EQ setting 主要分別:
1. Auto Cal. EQ cut 左好多野
2. 用Manual set 把1kHz人聲提高 , 1kHz 是人聲, 推到+db真係有力, 人聲出, detail保留,
3. 我再在16kHz高音推高+3-4db 動感多左, 細節會有些提高,
4. 我又係60Hz左右加大+2.5-3db, 如有booming, 改返細db就好好多
4. 取"0db"為EQ 中心, Lee個最大分別, 因為無論+/- db都會令AV amp 增加失真, 而+db又比-db失真較多...即係
(0db) best > -db (better) > +db   
所有以"0db"為EQ 中心, 有+db有-db會少d失真
5. 左右ch EQ也許有些不同
6. 好多Ching 鍾意 Center Speaker setting 加大1db, 而我就set 0db , 嚮#4 1kz 實則set +1.5db, 效果仲好...




Center Speaker, present speaker L/R --- #4 1kz 實則set +1.5db, 其它EQ數據巳在photo唔重覆la...

唔該記住"加分"

Einstein 發表於 2009-9-6 16:58

Center Speaker, present speaker L/R --- #4 1kz 實則set +1.5db

Einstein 發表於 2009-9-6 18:07

勁...........{:6_193:}
hkp1196 發表於 2009-9-6 17:43 http://www.post76.com/discuss/images/common/back.gif
到你部 DENONA1 升呢la...{:6_150:}

Einstein 發表於 2009-9-6 18:08

{:6_193:}好野,高手即係高手
timmywan 發表於 2009-9-6 17:52 http://www.post76.com/discuss/images/common/back.gif
但我冇你對 金耳朵....{:6_147:}

10bucks360 發表於 2009-9-6 18:21

有機會試下先, 不過你係播d咩去tune?

Einstein 發表於 2009-9-6 18:24

好多Ching 鍾意 Center Speaker setting 加大1db, 而我就set 0db , 嚮#4 1kz 實則set +1.5db, 效果仲好...{:6_162:}

rle18322 發表於 2009-9-6 18:45

好野,高手即係高手

Einstein 發表於 2009-9-6 19:02

好多Ching 鍾意 Center Speaker setting 加大1db, 而我就set 0db , 嚮#4 1kz 實則set +1.5db, 效果仲好...{:6_162:}
Einstein 發表於 2009-9-6 18:24 http://www.post76.com/discuss/images/common/back.gif
當然嚮#4 1kz 每+/-0.5db adjust 下, 合your system & cup of tea...

小瑟 發表於 2009-9-19 00:01

雖然我唔係YAMAHA既用家, 又雖然我睇唔明你D野, 不過就你呢份熱誠, 就值得精華呢~~~

rewai 發表於 2009-9-19 10:34

很好的分享,得閒試試,謝謝。
頁: [1] 2 3
查看完整版本: Yamaha AV amp Parametric EQ

重要聲明:本討論區是以即時上載留言的方式運作,Post76玩樂討論區對所有留言的真實性、完整性及立場等,不負任何法律責任。而一切留言之言論只代表留言者個人意 見,並非本網站之立場,讀者及用戶不應信賴內容,並應自行判斷內容之真實性。於有關情形下,讀者及用戶應尋求專業意見(如涉及醫療、法律或投資等問題)。 由於本討論區受到「即時上載留言」運作方式所規限,故不能完全監察所有留言,若讀者及用戶發現有留言出現問題,請聯絡我們。Post76玩樂討論區有權刪除任何留言及拒絕任何人士上載留言 (刪除前或不會作事先警告及通知 ), 同時亦有不刪除留言的權利,如有任何爭議,管理員擁有最終的詮釋權 。用戶切勿撰寫粗言穢語、誹謗、渲染色情暴力或人身攻擊的言論,敬請自律。本網站保留一切法律權利。權利。