seafoodlover
發表於 2013-9-20 23:14
CAS2012 發表於 2013-9-20 16:56 static/image/common/back.gif
I tried full format, still cannot see usb flash memory
read my reply on #90
(Post76 Android 手機版送出)
CAS2012
發表於 2013-9-21 11:56
I download the 3 elf files, but cannot add/replace to the original raspyfi.img, can you give advice on how to replace the elf file.
dick88
發表於 2013-9-21 12:13
CAS2012 發表於 2013-9-21 11:56 static/image/common/back.gif
I download the 3 elf files, but cannot add/replace to the original raspyfi.img, can you give advice...
You may format the SD Card and write the .img file again.
(Post76 Android 手機版送出)
CAS2012
發表於 2013-9-21 12:24
dick ching,
I said,in what way I can add the 3 elf files into raspyfi.img in window environment.
Thanks
補充內容 (2013-9-21 14:43):
dick hing, I found that I need to insert the SD card back to PC, I succeeded in replace the 3 elf files, but the usb flash memory cannot be seen. I tried using a powered usb hub, no luck.
arho
發表於 2013-9-21 17:00
dick88 發表於 2013-9-20 11:41 static/image/common/back.gif
要update MPD database, update folder,跟住你會見到在下角Browse update 緊.
(Post76 Android 手機版送 ...
試過一樣唔得 {:6_191:}
seafoodlover
發表於 2013-9-21 17:10
本帖最後由 seafoodlover 於 2013-9-21 17:12 編輯
first,white the image to the sd card,then replace these three files
CAS2012 發表於 2013-9-21 12:24 static/image/common/back.gif
dick ching,
I said,in what way I can add the 3 elf files into raspyfi.img in window environment.
u should able to see as these files are in the fat partition
(Post76 Android 手機版送出)
dick88
發表於 2013-9-21 17:36
CAS2012 發表於 2013-9-21 12:24 static/image/common/back.gif
dick ching,
I said,in what way I can add the 3 elf files into raspyfi.img in window environment.
Your usb hub should be have self power.
(Post76 Android 手機版送出)
izthat
發表於 2013-9-22 00:50
After 2 days battle with the Pi, finally able to install and boot the PaspyFi, the problem of not able to boot is due to the 1.0 not support new Pi, see below
-----------------------------
We’ve got a lot of feedbacks of RaspyFi 1.0 not booting on some Raspberry Pis. These are new Raspberries with the Hynix RAM. RaspyFi was developed on an older model. So for those of you with a non-booting Pi, here’s the Fix (huge thanks to blueberry who found this)
Download this files: https://docs.google.com/file/d/0B6GMsyByGsfdQXVXeV9tdk1lejg/edit
Insert your SD Card in your Card Reader, and open the first partition (the only one you can see in Windows)
Replace start.elf , start_cd.elfand start_x.elf with the ones you previously downloaded
If you can’t replace them, open “my computer” as administrator
Then, plug again your SD and enjoy RaspyFi! For more information, and reports about this procedure, please refer here:
http://www.raspyfi.com/forum/raspyfi-install-and-troubleshooting/raspyfi-wont-boot/
-------------
After installed the RaspyFi, I found that it was not fully support my XMOS Dac..... {:6_199:}{:6_243:} which with crackling sound in between tracks......... just like the Audio station of Synology DS did...... {:6_216:}
And the quality of sound from RaspyFi just more or less like the MPD I installed directly in the Synology Diskstation.{:6_238:}
CAS2012
發表於 2013-9-23 11:51
本帖最後由 CAS2012 於 2013-9-23 11:58 編輯
CAS2012 發表於 2013-9-20 16:56 static/image/common/back.gif
I tried full format, still cannot see usb flash memory
This morning, I use Scandisk usb flash memory, after quick format to FAT32, the usb memory is seen in Raspyfi. Seems not working for brand names ofHP and Transcend.
Thanks all ching for your inputs.
dick88
發表於 2013-9-25 17:56
師兄,你地RaspyFi有無試過play DSD?
(Post76 Android 手機版送出)
頁:
4
5
6
7
8
9
10
11
12
13
[14]
15
16