Touchpad成功刷成Andriod*更新V3.5*

dennislock

ALPHA3.5
* Video playback improvements
* UI Composition improvements(nothing major)
* 3D speed improvements in some circumstances
* 3D game compatibility improvements(Shadowrun tested, but other games may work better as well)
* Some changes to wpa_supplicant, remains to be seen whether it makes any difference


CM7 Alpha3.5 Download Link
http://uploaded.to/file/fmph65kk

1.可直接用touchpad下戴上面的檔案再用檔案緦管把它放到sd卡根目錄下cminstall目錄中或使用2.的方法

2. 把TP用USB線連到電腦上，把update-cm-7.1.0-tenderloin-a3.5-fullofbugs-signed放到SD卡根目錄下 CMINSTALL目錄中

3. 長按關機鍵>選擇重新開機 >選擇Recovery。

4. (備份ROM ), 選擇Backup and Restore>Backup (如果不想備份或不擔心資料會違失 ,可跳過這步)

5. (清除Cache ) ,返回recovery主頁 >wipe cache partition > Yes - wipe Cache

6.( 清除Dalvik Cache與Battery stats) , 返回recovery主頁>Advanced > Wipe Dalvik Cache>Yes - Wipe Dalvik Cache >++Go Back++>Wipe Battery stats >Yes - Wipe Battery Stats
>++Go Back++>Wipe Battery stats >Yes - Wipe Battery Stats

7.(開始更新系統) ,返回recovery主頁 > Install zip from sdcard >cminstall >update-cm-7.1.0-tenderloin-a3-fullofbugs-signed.zip

8. 系統更新完畢後，返回recovery主頁 >Reboot System Now

重啟進入系統時，會在Android的logo等待比較長時間 ,不用擔心,進入系統後成功完成

eva0083hk

回復 61# dennislock


其實touchpad上android系統, 宜家ROM完整未呢? 重有冇咩問題? THX!
我用緊kindle fire, ROM未完善(無實體鍵原來有少少麻煩), 有少少想轉機...
(但KF我都覺得重, 可能轉大機重死... )

cbk

回復 61# dennislock

My PC running on Windows 7 x64 version cannot recognize my Touchpad via the USB cable.  Every time I connect it to the PC, it prompts "USB Drive" or "Close".  Then, I choose "USB Drive" and a large USB logo appears on my Touchpad.   But my PC will prompt me to format the Touchpad.  I have tried another PC running on XP but encountered the same problem.

Anybody help?

cbk

Finally resolved the problem by completely reinstalling the WebOS.