2.35:1 及16:9的問題

axe234

各ching,終於可投入投投世界,但有一問題想向各大大請教,各位是否都要每一次在2.35:1與16:9之間再重新zoom in zoom out?我現在睇star wars special feature 時因集合兩個format 總有分別,現我唯有將2.35:1的合適投放位置放在第一位,但當16:9時又投到出哂間,各大大請分享你們的經驗謝謝!

dominickwok

再重新zoom in zoom out?  => YES

Some projectors can do the zoom in/out automatically, e.g. Panasonic AE4000.

I assume you're using 2.35:1 scope screen (otherwise you don't have such problem at all).

axe234

回復 2# dominickwok


    Ching Dominickwok, actually, I just have a DLP projector and 16:9 screen, but, some how when I watching a 2.35:1 movie, the projection can not fill the both right and left side, I need to adjusting the  zooming and height to fine tune the projection, but, when I watching 16:9 format the projection in right and left was out of the box, I need to adjust it again. Are you have the same issue? Or just my screen size isn't a real 16:9 screen? Thank yoy so much!

avkel

你的投影機是什麼型號? 若16:9 Projector 配16:9 Screen是不會有你的情況

axe234

回復 4# avkel


    Ching Avkei, 我用緊Benq 1000+ thx,

dominickwok

回復  avkel


    Ching Avkei, 我用緊Benq 1000+ thx,
axe234 發表於 2011-9-24 05:47

Make sure you set the W1000+ to the correct aspect ratio to match with your 16:9 screen.  Other than incorrect setting of aspect ratio, I have no idea what's wrong with your setup.

If set correctly, you adjust zoom/focus based on 16:9 content to fill your 16:9 screen; and then you will find 2.35:1 blu-ray movies are projected nicely on your screen with top and bottom black bars; there is no need to change zoom again.

axe234

回復 6# dominickwok


    dominickwok ching, thanks for your adviced, I've reset the projector posistion, and finally can fill the whole screen!! But, due to I need to put the screen umder the pillar, now the new porjector position is just few inches above my head! But, the image was amazing and it's totally worth it!!
Last but not less, thank you once again! You help me alot!! Cheers!!