有關Netflix

te2370

請教下，有冇師兄用緊Panasonic VT60?
係咪未有Netflix個Apps Download?
(Post76 Android 手機版送出)

frankiepoon

SonSon 發表於 2016-1-8 09:53
開首2分鐘畫面起晒格，想轉台時先開始清返，因為冇睇過呢套HD版冇得比較，但以日劇標準黎講已晒收貨…

因為佢行Adaptive Bitrate要load一陣先變最高畫質~

frankiepoon

mr.hosino 發表於 2016-1-8 07:34
我都係用shield tv，入lx89，無論電影或劇集，都只有立體聲。有冇師兄試到有5.1surround呀？ ...

https://forums.geforce.com/defau ... 5-1-surround-sound/

Netflix 5.1 sound requires EAC3 pass-through (which SHIELD supports). However, many TVs don’t support EAC3 pass-through (only AC3).

You will get Netflix 5.1 if your TV or your receiver supports EAC3.

Here are the valid HDMI routing options for Netflix 5.1 surround sound:

1)        SHIELD > Receiver > TV

In this configuration, the TV does not have to support EAC3 pass-through. However, your receiver needs to support EAC3 decode – most do.

EAC3=Dolby Digital Plus

mr.hosino

Shield TV issue.

問題已經解決。
冇5.1: 係條HDMI線問題。
冇4K: 係電視個HDMI port唔support HDCP 2.2。

SonSon

wilfred 發表於 2016-1-8 16:12
有啲機睇電視同外部輸入嘅時候會預設唔同嘅畫質設定，即係光暗，色深會唔同咗，請問師兄呢兩個畫面係咪確 ...

其實我已將所有經HDMI輸入及TV signal改為同一設定，方便比較，唯一係Arrow係錄影檔所以經MTV出。 不過事後都有懷疑係source問題？因有D標明係UHD片，但近睇都有noise,  但又如唯一日劇內衣，HD畫面又出奇乾淨。
(Post76 Android 手機版送出)

SonSon

frankiepoon 發表於 2016-1-9 01:22
因為佢行Adaptive Bitrate要load一陣先變最高畫質~

所以有好處係中途唔會緩沖唔駛等，唔好既係自設畫面質數冇得手動改。
(Post76 Android 手機版送出)

SonSon

mr.hosino 發表於 2016-1-9 09:18
Shield TV issue.

問題已經解決。

Ching部UHD tv所有HDMI都唔support HDCP 2.2 ?
(Post76 Android 手機版送出)

mr.hosino

SonSon 發表於 2016-1-9 11:22
Ching部UHD tv所有HDMI都唔support HDCP 2.2 ?
(Post76 Android 手機版送出)

唔係，Port 1 support。