專用黑膠訊號線

garranho

我都想知有咩phono線好用！

Wilmer威馬

garranho 發表於 2015-2-18 23:23
我都想知有咩phono線好用！

香港有代理，比較易揾，1 皮以内名牌：
http://www.oyaide.com/ENGLISH/AU ... y/analog/pg546.html

http://ortofon.com/zh/hifi/produ ... 010-r-tonearm-cable

http://ortofon.com/zh/hifi/produ ... 010-l-tonearm-cable

http://item.taobao.com/item.htm? ... p;abbucket=2#detail

http://item.taobao.com/item.htm? ... p;abbucket=2#detail

http://item.taobao.com/item.htm? ... p;abbucket=2#detail

http://item.taobao.com/item.htm? ... p;abbucket=2#detail

http://item.taobao.com/item.htm? ... p;abbucket=2#detail

邊度平、有現貨或可以訂，大家自己揾。

另外仲有好多，例如 ACOUSTIC REVIVE、LINN、KIMBER、AQ。。。 基本上個個 brand 都有，爭在代理返唔返貨，仲未計國產同本地品牌、仲有 eBay、Audigon 上面一 d 個人 DIY 品牌，唔怕冇野玩，只怕冇錢玩

bbocram

nippon 發表於 2015-2-18 13:57
would you mind tell us how much and where can buy it? Thanks!

Hi Nippon兄，幾百蚊only，威達行貨。

nippon

bbocram 發表於 2015-2-19 05:27
Hi Nippon兄，幾百蚊only，威達行貨。

謝謝師兄！

samuelt

小弟已前用RCA訊號線再加條銀線做地，完全收貨；而家轉了新盤，claify唱臂已連埋條phono缐，老實講，我聽唔到分別。我既意思係靚嘅訊號線絕對可以用來做phono缐的。

Wilmer威馬

samuelt 發表於 2015-2-20 11:22
小弟已前用RCA訊號線再加條銀線做地，完全收貨；而家轉了新盤，claify唱臂已連埋條phono缐，老實講，我聽唔 ...

唔係話普通 RCA 線唔得，等如 digital，唔用正式同軸或 AES，用普逼 analog RCA 或平衡抽一條當 digital 線用一樣會響，如果你支 Claify 唱臂有得換線就好，冇比較你係唔知，用唔用正式 phono 線（tonearm cable）果個分别，同個盤只係按工具 tune 標准但冇針對性 fine tune 一樣，未 optimize 但一般係唔知分别

ram

Wilmer威馬 發表於 2015-2-20 18:56
唔係話普通 RCA 線唔得，等如 digital，唔用正式同軸或 AES，用普逼 analog RCA 或平衡抽一條當 digital  ...

馬sir, 想請問由phono 去 phono amp 用""黑膠訊號線"", 然後phono amp 去pre amp 又需唔需要用返""黑膠訊號線""？or 一般既RCA訊號線就ok呢？
(Post76 Android 手機版送出)

Wilmer威馬

ram 發表於 2015-2-26 07:36
馬sir, 想請問由phono 去 phono amp 用""黑膠訊號線"", 然後phono amp 去pre amp 又需唔需要用返""黑膠訊 ...

NO NEED, after phono amp already line output, although the level not as high as CD, but high enough to against capacitance issue, no need for ultra low capacitance, except: between MC head amp (or step up transformer) and MM (RIAA ) phono amp, you will still need a tonearm cable.

Actually very easy to understand why tonearm cable need ultra low capacitance, look at some phono amp with not just loading resistance select, but also loading capacitance select, as long as cartridge needs to match for not just loading impedance but also loading capacitance, as the tonnearm cable once attached, it is act as a part of the loading to cartridge with add on capacitance, therefore if the cable have high ( or even just at general line level requirement) capacitance, you can never match the right capacitance, then you never get the optimize performance.