amp推喇叭一問

wyman7727

部amp規格:
Power Output per Channel 50 Watts
Speaker Impedance 8 Ohms
Rated Power Band 20Hz to 20kHz
Total Harmonic Distortion 0.005%
Intermodulation Distortion 0.005% maximum, if the instantaneous peak power is 100 watts or less per channel with both channels operating for any combination of frequencies from 20Hz to 20kHz
Dynamic Headroom 1.5dB
Frequency Response +0,-0.5dB 20Hz to 20kHz
Frequency Response, +0, -3dB 10Hz to 100kHz
Sensitivity (Unbalanced) 300mV
Sensitivity (Balanced) 600mV
Maximum Input Signal (Unbalanced) 8V
Maximum Input Signal (Balanced) 16V
Signal To Noise Ratio 105dB
Input Impedance (Balanced / Unbalanced) 25K/25K
Damping Factor>150
Preamplifier Output 3V (8V maximum)
Preamplifier Output Impedance 500 Ohms
Voltage Gain 36.5dB
Power Guard<2% THD with up to 16dB overdrive at 1kHz
新手請問可以推LS50 或ProAC TA speaker嗎?
或者有冇教學Link分享給小弟?thx a lot

colorp

一定推得到，不過好唔好聲就好難講

hksarac

你部Amp是什麼牌子??二對的靈敏度都是86db，有聲但未必好，如是A類機就會好

wyman7727

hksarac 發表於 2014-10-11 21:44
你部Amp是什麼牌子??二對的靈敏度都是86db，有聲但未必好，如是A類機就會好

是Mcintosh MHA100,推耳機LCD3幾好聲,想買對書架喇叭玩下,但唔識點揀

radhk

wyman7727 發表於 2014-10-12 00:35
是Mcintosh MHA100,推耳機LCD3幾好聲,想買對書架喇叭玩下,但唔識點揀

部amp power唔算大. 對speaker唔算易推.

不過, 就算夠力水, 夾唔夾聲又係另一個問題, 呢樣spec又係顯示唔到出來.

所以如果你想搵陣d, 點都要出去試.

你部amp邊到買? 有冇喇叭賣? 就算無你提果兩對speaker, 都可以搵對spec近似既speaker去試, 咁你大概會試到個效果.

momolee

wyman7727 發表於 2014-10-12 00:35
是Mcintosh MHA100,推耳機LCD3幾好聲,想買對書架喇叭玩下,但唔識點揀

ma100 唔係已經連埋喇叭既咩？{:9_419:}

wyman7727

要另外買的，但比較普通，價錢又頗貴