投影機及AMP位置

smokeyduck

will you suffer the devices/gears cannot detect the signals from remotes?

putting ALL components to the back is surely no problem but just because to comfort you not to use a long HDMI between projector and av-amp seems not worth it.

why not putting a large cross section area trunking inside the wall, ceiling/floor so that you can easily hide the cable and be able to change it in the future.

bigair

其實唔放前面，前面仲可以清簡d，感覺似戲院d添

kimyeung123

多謝各位意見, 過幾個月裝修完睇下會搞左乜出黎再同大家報告

samuelhin

kimyeung123 發表於 2014-4-13 22:21
多謝各位意見, 過幾個月裝修完睇下會搞左乜出黎再同大家報告

要計吓HDMI線定喇叭缐貴口！

Blackdog530

I put all my gears at the back, all remotes are working perfectly.  I use a 10m sub cable to put the sub at the front.  And I believe in general, hdmi is much more expensive than speaker cables.  Also, speaker cables are easier to turn inside the wall.  So, I don't think there are anything wrong to put amp at the back.

kimyeung123

Blackdog530 發表於 2014-4-14 00:22
I put all my gears at the back, all remotes are working perfectly.  I use a 10m sub cable to put the ...

if you don't mind posting some photos, would you share your layout to me for reference, thanks!