Problems with ARC and Blu Ray Player

feelfix

器材：Sony W800A TV, Pioneer 1123K Amp, Pioneer BDP450 player

連接方法：Amp HDMI Out to TV HDMI1, BDP HDMI1 to TV HDMI4, BDP HDMI2 to AMP BD IN

問題一： ARC not working between TV and Amp.

問題二：TV keeps flashing when 開始播BR。持續大概五至十分鐘之後正想番。還有TV無端端自己由HDMI4跳去HDMI1 channel.

問題三：嘗試拔出條HDMI線 between TV and AMP 問題二即解決。是什麼原因？

先謝各高手師兄指導一下。^_^
(Post76 Android 手機版送出)

feelfix

any c-hing can help please?

HOHOHO

feelfix 發表於 2013-12-20 15:47
any c-hing can help please?

the ARC mark on the TV HDMI input which position? HDMI 1or 2or 3 or4?

feelfix

HOHOHO 發表於 2013-12-20 19:31
the ARC mark on the TV HDMI input which position? HDMI 1or 2or 3 or4?

ARC marked on HDMI1.

lamfatlun

電視會唔會開左啲智能選擇hdmi既野？
因為電視當sence倒邊個hdmi有signal入佢就會自己跳去果當hdmi既input...
試不去setting搵下有冇hdmi既選項， 之後關左佢！
(Post76 Android 手機版送出)

HOHOHO

feelfix 發表於 2013-12-21 00:43
ARC marked on HDMI1.

BDP HDMI1 to TV HDMI4, BDP HDMI2 to AMP BD IN


1. MAKE SURE BDP HDMI 1 FOR PICTURE ONLY; BDP HDMI2 FOR SOUND ONLY
2. TRY BDP HDMI1 TO tv HDMI 2 OR 3 OR 4 THEN BDP USE RCA SOUND OUTPUT DIRECT TO tv AUDIO INPUT!