Connect which machine to the isol

Blackdog530 · 發表於 2012-3-18 02:34

如果想睇到更多76師兄嘅分享，快啲登入成為會員啦！

您需要登入收看或下載更多內容。還未成為會員？成為會員

x

Ching, since the Isol cleanline2 max current is 10A, should I connect my pre-amp (Onkyo 905 with 4.6-5A) or power amp (Lexicon Rx-7 with 6A) to it? And plug another one to the wall or any other suggestions?

Thank You

P.S. any suggestions for the RCA?

plnl88 · 發表於 2012-3-18 03:31

本帖最後由 plnl88 於 2012-3-18 03:39 編輯

Ching, since the Isol cleanline2 max current is 10A, should I connect my pre-amp (Onkyo 905 with 4.6 ...
Blackdog530 發表於 2012-3-18 02:34

cleanline2 10Ax220V = 2200W
都好難同時扯爆 10A 佢。
所以插哂落 hi power socket 都應該無問題的。
若師兄覺得唔好，可以 RX7 插牆，因後級要電多於濾波。
其實師兄你隻牆插係 10A 定 15A 架？

Blackdog530 · 發表於 2012-3-18 21:32

回復 2# plnl88

My wall socket is just a normal socket, and I still have a projector and a Blu-ray player need to plug to the isol. So, I should keep my current setting, and use the wall for the power amp, right?

plnl88 · 發表於 2012-3-18 21:42

回復 plnl88

My wall socket is just a normal socket, and I still have a projector and a Blu-r ...
Blackdog530 發表於 2012-3-18 21:32

你去主電箱度睇睇你隻牆座係幾多 A 好啲？
如果你隻牆座個 MCB 得 10A，就算一出兩頭 TOTAL 都係一樣 10A 架乍。

Blackdog530 · 發表於 2012-3-18 22:11

回復 4# plnl88

Ching, thx for your reply, I will check that later then!!

[請教] Connect which machine to the isol

如果想睇到更多76師兄嘅分享，快啲登入成為會員啦！

76 榮譽貢獻勲章

76 榮譽VIP勲章

76 精選榮譽會員勲章