But to me, it's somehow not very convenient.
Since from 5507, I connected Projector to Main, LCD to Sub. However, LCD can still display the Setup Menu. Now 5509, I need to Turn On Projector. {:1_260:}{:1_260:}
OK, then I connect Projector to Sub, unfortunately, when I increase or decrease the Volume, I cannot see it on the screen.......
Moreover, on Onkyo Setup Menu, there are settings:
1. Both
2. Both (Main)
3. Both (Sub)
I already selected Both, I expect "Both" means displays the Same things on Both display devices...... Obviously I'm wrong, but this is really...... {:1_336:}{:1_336:}
回復 1# nicknick
hi, what amp did u use b4?
本帖最後由 nicknick 於 2011-12-23 11:11 編輯
BMoreover, on Onkyo Setup Menu, there are settings:
1. Both
2. Both (Main)
3. Both (Sub)
LPL 發表於 2011-12-23 10:32 http://www.post76.com/discuss/images/common/back.gif
我都以為呢個選項會影響，點知係冇分別的，咁我都唔知呢個選不同項目的結果有甚麼不同？
雖然我依家冇用projector，不過都諗住遲D加，所以呢個唔方便遲早會輪到我，早D知道解決方法都好。
既然有呢個選項，而以前5507都可以兩個hdmi同時出OSD, 咁話唔定係firmware問題而將來會出得番。
除非係onkyo設計上認為應該只得main有OSD才是正確，刻意調整到咁的，咁就真係冇辦法，又或者同呢部機用兩個視訊晶片有關？
我依家都嘗試習慣睇番機前面個display，咁就唔駛用TV的OSD了。
本帖最後由 nicknick 於 2011-12-23 11:17 編輯
回復nicknick
hi, what amp did u use b4?
Jackiewakusome 發表於 2011-12-23 10:51 http://www.post76.com/discuss/images/common/back.gif
我之前用onkyo 905，直至買入oppo95，試過用oppo95本身個解碼及RCA analog output直駁後級，發現D聲仲正過95經hdmi俾onkyo 905解碼出聲，之後就拿拿聲放咗部905，一心諗住買當時部5508前級，點知已經停產要等5509，等左半年等到今個月才買番部av preamp。
回復 73# nicknick
两者( 主):
若您的电视连接到HDMI OUT MAIN 和HDMI OUT SUB，请选择此项。 视频信号从两个HDMI 输出端输出，但是 HDMI OUT MAIN 将是优先输出；根据分辨率而定，视频信号可能不从HDMI OUT SUB 输出。
两者( 副):
若您的电视连接到HDMI OUT MAIN 和HDMI OUT SUB，请选择此项。 视频信号从两个HDMI 输出端输出，但是 HDMI OUT SUB 将是优先输出；根据分辨率而定，视频信号可能不从HDMI OUT MAIN 输出。
hope Onkyo can improve this in future Firmware..... {:1_338:}
