甘你可以搵 tv rack 架WO
本帖最後由 rlwk2009 於 2011-6-18 23:30 編輯
http://www.nbnorthbayou.com/detail_p.asp?id=806
http://www.nbnorthbayou.com/detail_p.asp?id=871
本帖最後由 4pk 於 2011-6-18 22:28 編輯
ching小弟劣作,可以睇下
http://www.post76.com/discuss/viewthread.php?tid=70929
NB係應該都系土炮, 假貨就度度都有,
注意有兩款NB,1款接口糸汗上去,雖然點到魚鄰汗,但質地成疑,另1款糸無接口,每段倒帽出黎,用鋁合金做,我就系用尼款,最多30kg,$2八0, 夠用la,TV越梨越輕,
買架+2百五至3,4百連安裝, 千其咪塭佢地,求其樓下水電佬$8十搞掂,有興趣diy油壓鑽$5xx-$8XX,鴨記近地鐵,KING Sir話個支紅菊$8xx,ching夠大力,可以去億細通買個支500W,$1九0,堅過我個把$2八0
如果個架向牆上,鑼絲位之間接近(即糸我個個),受力位集中,建議用爆炸鑼絲(平爆定拉爆自已諗),相反,向牆上鑼絲分開(一大塊野貼住牆),個種就可以用叧1 C兄提供用2寸鑼絲加塞.
留意好多架上左牆無得再較平水,即糸入牆鑼絲打歪左就玩完,記住買有得再較平水個隻.
我食飯時轉去飯聽90度,又試過人肉拉爆佢(怕跌落梨中小朋友),結果系個架毫無反應.
Very Useful !!
Im using Vogel Very solid and good looking
回復 5# aosora
Used it for more than half a year, no shifting at all, I'm sure about that because its just a few mm above my center speaker, if it drops, I can tell immediately.
C-Fu install that for me, they spent a lot of time to get it installed. The key tracks are the position of the screws on the wall and also the alignment of your TV on the mount, although it sounds like a simple task, but you need to be skillful to do this right.
Thx 咁多位師兄
我諗我會去買NB架, 都咁多ching推薦
可能要麻一麻煩我個裝修cf啦
如果我自己裝, 可能仲危過個架
P.S. rlwk2009 ching 你o個款好型仔 !!
本帖最後由 aosora 於 2011-6-20 14:45 編輯
回復 15# tip1016
Ching 你呢隻好firm
但我諗會好貴下 {:6_191:}
回復 18# aosora
Yes but the tv is 10 times more expensive than the holder and it comes with guarantee of 10 years
回復aosora
Yes but the tv is 10 times more expensive than the holder and it comes with guar ...
tip1016 發表於 2011-6-20 17:38 http://www.post76.com/discuss/images/common/back.gif
我上amazon睇過, vogel隻8345, 連shipping要$2,300左右
果然非一般呀
