論壇 › 家庭影院 › 我都MoPad

ming2002 發表於 2011-6-9 00:06

我都MoPad

原本用開釘脚, 大概傾斜4度。聽Ching講毛pad幾好, 咪買嚟下囉。{:1_332:}

用咗之後中罝傾斜8度, 對正耳仔位，覺得對白清晣咗, 細緻咗，特別係高音，更加清爽鏗鏘。之後又連個網都除埋, 又再清晣D。

兩樣改動我諗對我個中罝有10-15%改善，正!{:1_335:}

對正耳仔位

CanonEOS 發表於 2011-6-9 00:08

How much and where to buy?

victorwk1628 發表於 2011-6-9 00:14

我都訂了, 明天去攞貨, 希望效果正面!

ming2002 發表於 2011-6-9 00:17

回復 2# CanonEOS


    Pls see link below:

http://www.post76.com/discuss/viewthread.php?tid=51487&highlight=mopad

edlsang 發表於 2011-6-9 09:22

回復 3# victorwk1628


    mee too ...........

fm31331 發表於 2011-6-9 10:33

MoPad改善中罝!{:6_175:}

chacha1222 發表於 2011-6-9 10:49

{:6_158:}buy tak good{:6_157:}

breadvan 發表於 2011-6-9 21:40

if possible try align the surface of your centre channel to the surface of your LR speakers, the idea is your LCR channels sound wave should arrive at your ear at the same time with as little adjustment from your AV amp as possible.

ming2002 發表於 2011-6-9 22:53

Thanks for your advice. {:1_249:}

Are you talking about ITU-R standard? (see link below)
http://www.post76.com/wordpress/?p=6633
In this case all sound wave arrive at the same time and little adjustment is required.

But I'm using Dolby and DTS setting. In my case the LCR aligned on the same plane. But the distance to my ears are different. In this case I have to adjust the time delay (distance) in my Amp.

breadvan 發表於 2011-6-15 13:43

Essentially yes, I would try to minimize the use of delay if physically possible.

查看完整版本: 我都MoPad