ONKYO TX-SR508 AV amp settin speaker ohm?
ONKYO TX-SR508 AV amp 前置 POLK lsi9 speaker 4ohm 其他speaker 6 ohm 請問AV amp (ONKYO TX-SR508 )set多少ohm?{:1_342:} ONKYO TX-SR508 AV amp 前置 POLK lsi9 speaker 4ohm 其他speaker 6 ohm 請問AV amp (ONKYO TX-SR508 )set ...leungko 發表於 2011-4-28 11:29 http://www.post76.com/discuss/images/common/back.gif
我記得manual好似話set 4 ohm 回復 1# leungko
Okay, confirm la... for 608
4ohms:
Select if the impedance of any speaker is 4 ohms or
more but less than 6.
回覆: ONKYO TX-SR508 AV amp settin speaker ohm?
ONKYO TX-SR508 AV amp 前置 POLK lsi9 speaker 4ohm 其他speaker 6 ohm 請問AV amp (ONKYO TX-SR508 )set ...leungko 發表於 2011-4-28 11:29
我記得manual好似話set 4 ohm
哦，但可不可以set其它呢？ Your speakers is reasonably sensitive at 88dB so your amp might be able to drive them in a small room. Try it with the 6/8 ohm setting first, if it sounds fine and your amp does not go into protection mode then you are set.
Setting it to 4 ohm limits the amount of power going into the speakers. Manufacturers suggest this setting for certification purposes. 多謝,,各位............ 回復 1# leungko
老友記，唔好set錯，係一定set6ohm，五隻喇叭，其中一只或一對高過4ohm都要set6ohm
回覆: ONKYO TX-SR508 AV amp settin speaker ohm?
多謝。又了解小小了回覆: ONKYO TX-SR508 AV amp settin speaker ohm?
重低音in同out用途？我接著in有沒有問題呢。，。。，。？ Connect the sub-out of your AV receiver and connect it to the sub-in of your subwoofer.
頁:
[1]