patrick12345 發表於 2011-4-4 09:20 http://www.post76.com/discuss/images/common/back.gif
17. Next adjust the phase and polarity settings. Phase is in effect a short delay in the reproduction of the audio signal. The polarity reverses the phase (i.e. 180o shift). Adjusting phase can change the dynamics of standing waves and frequency cancellations in the room. Sometimes it may be useful to adjust the phase if there is a particularly difficult peak or valley to eliminate, and/or your room placement options are limited. Phase and polarity are also important tools to match your subwoofer to your main speakers. You will often see a dip or peak in the crossover frequency between your subwoofer and main speakers. Rather than correcting this dip with an EQ, try adjusting the phase and polarity settings. It is very common for the main speakers to interact with the subwoofer to diminish or accent frequencies near the crossover point (since this is the point where both the subwoofer and the speakers are playing the same audio information). Don’t be afraid to experiment to find the perfect match between your subwoofer and main speakers!
** Quoted from the manual of Velodyne DD Series ** 回復 10# Big_McIn
Thanks a lot.But do you mean the first setting is through the DD & then the second setting is through the Amp manually ? Steps are correct.
頁:
1
[2]