tcflex401 發表於 2011-2-9 17:52

EQ setting for two subwoofer

I have a Velodyne DD-10 with advanced EQ managment and i also have another subwoofer without EQ setting. Now i have a velodyne SMS-1 ( subwoofer managment system ). Am i correct that i use a Y split with one cable to SMS-1 and then to another band subwooferand from the Y split, another line to DD-10. That mean i use SMS-1 to manage one subwoofer ( without EQ) . If yes, when doing EQ tunning, i have to use two micophone connect to DD-10 and another subwoofer to do tunning. Is it correct ? or do EQ tunning one by one.


At the same time, i am thinking to use SMS-1 to manage EQ for two subwoofer, that mean from AMp --> SMS-1 -> one to DD-10 and one to another subwoofer. That method can centralize EQ for both subwoofer. However, how about the EQ setting in DD-10 ? Can any one tell me which one is good ?

alzard 發表於 2011-2-21 16:59

That depends on location of your subwoofer.If you stack the subwoofer one over another, then centralized EQ may have the maximized effect as the frequency response of two subwoofers are more or less the same.

Since you will be y-split the signal through your SMS-1, I personally prefer allowing subwoofer build-in EQ do its job first before SMS-1 EQ calibration.
頁: [1]
查看完整版本: EQ setting for two subwoofer

重要聲明：本討論區是以即時上載留言的方式運作，Post76玩樂討論區對所有留言的真實性、完整性及立場等，不負任何法律責任。而一切留言之言論只代表留言者個人意 見，並非本網站之立場，讀者及用戶不應信賴內容，並應自行判斷內容之真實性。於有關情形下，讀者及用戶應尋求專業意見(如涉及醫療、法律或投資等問題)。 由於本討論區受到「即時上載留言」運作方式所規限，故不能完全監察所有留言，若讀者及用戶發現有留言出現問題，請聯絡我們。Post76玩樂討論區有權刪除任何留言及拒絕任何人士上載留言 (刪除前或不會作事先警告及通知 )， 同時亦有不刪除留言的權利，如有任何爭議，管理員擁有最終的詮釋權 。用戶切勿撰寫粗言穢語、誹謗、渲染色情暴力或人身攻擊的言論，敬請自律。本網站保留一切法律權利。權利。