ekylam 發表於 2010-11-3 17:03

Panasonic TH-P65VT20H problem watching Cable-TV

Have a problem here and would like your advice.

I have just bought the Panasonic TH-P65VT20H recently and everything is fine - esp the stunning size of picture. But lately I noticed a problem when flipping multiple times (around 3 to 4) from my Cable-TV source (HDMI2) to TV source (built in decoder), then I lost my Cable-TV signal. It's just black - nothing. I think it still detects the input becuase it display "1080i/50hz" but no picture. I need to switch off and on the TV again to have the Cable-TV picture back.

Connectivity: RF ---> Cable-TV decoder ---> TV (via HDMI)

The TV aerial-in inputted by the Cable-TV decoder ant-out.

If signal is an issue then how come the TV picture is unaffected (because the TV signal is outputted by the Cable-TV decoder)? I tried different HDMI cables and different HDMI input on the TV but the results are the same. I don't know whether it relates to the RF cables because I just change to use QED Reference aerial/satellite cables, or problem with the Cable-TV decoder? Pls help.

toysonline 發表於 2010-11-3 17:09

本帖最後由 toysonline 於 2010-11-3 17:11 編輯

I used before ~~Connectivity: RF ---> Cable-TV decoder ---> TV (via HDMI)~~
have your same problem..
So I am using now ~~~2 RF output(form the Wall)One to CAbleTV another one to TV..
You can try try..{:1_351:}

ekylam 發表於 2010-11-3 17:16

回復 2# toysonline


Thanks! But I only have 1 x RF wall output so can I get a splitter to resolve this? Would also need a signal enhancer as I think the signal maybe halved?

ekylam 發表於 2010-11-3 17:43

Any recommendation to get a high quality RF splitter?

toysonline 發表於 2010-11-3 17:46

回復 4# ekylam


    I was Call CableTV CS..
.THey will arrange ~~2x RF output~~ to you!!

ekylam 發表於 2010-11-3 18:09

That's good... but by what reason you asked Cable-TV to install a 2 x RF output for you? Just to describe the case?

toysonline 發表於 2010-11-3 18:15

You only told the Tv signal problems...You need Two RF Output.
Just that..{:1_259:}

toysonline 發表於 2010-11-3 18:18

ChangeRF wall output >>>to Cable TV 2x RF splitter......

toysonline 發表於 2010-11-3 18:22

回復 6# ekylam


    like this

ekylam 發表於 2010-11-3 18:26

Great!!! Thanks your precious advice!!! Let me try asking Cable-TV then...

So next question, when using splitter, would the picture quality for both HD broadcast and Cable-TV be degraded? Or the same?
頁: [1] 2
查看完整版本: Panasonic TH-P65VT20H problem watching Cable-TV

重要聲明:本討論區是以即時上載留言的方式運作,Post76玩樂討論區對所有留言的真實性、完整性及立場等,不負任何法律責任。而一切留言之言論只代表留言者個人意 見,並非本網站之立場,讀者及用戶不應信賴內容,並應自行判斷內容之真實性。於有關情形下,讀者及用戶應尋求專業意見(如涉及醫療、法律或投資等問題)。 由於本討論區受到「即時上載留言」運作方式所規限,故不能完全監察所有留言,若讀者及用戶發現有留言出現問題,請聯絡我們。Post76玩樂討論區有權刪除任何留言及拒絕任何人士上載留言 (刪除前或不會作事先警告及通知 ), 同時亦有不刪除留言的權利,如有任何爭議,管理員擁有最終的詮釋權 。用戶切勿撰寫粗言穢語、誹謗、渲染色情暴力或人身攻擊的言論,敬請自律。本網站保留一切法律權利。權利。