本帖最後由 Big_McIn 於 2010-10-26 02:50 編輯
轉完av mode 又要law 過第2個remote 搞av amp 既setting
francis_leung21 發表於 2010-10-25 08:00 http://www.post76.com/discuss/images/common/back.gif
Francis Leung兄,
其實你想講乜？
No. 26我都有，以前亦曾接Lexicon CP 3 THX 5.1 system，CP 3 Front out 入No. 26 Single ended input，volume 調至12點，然後做AV Set-up，無問題，原因：
1. 5.1/7.1 前置聲道解碼後再以傳統十倍放大後，經Variable Resistance(Volume) 將訊息調節入Power Amp section，如AV Pre就經Variable Resistance (Volume) 將訊号調節經 Front out 入Power Amp，或經Variable Resistance (Volume) 將訊号調節再入Pre Amp經Bypass 直出，入Power Amp。
2. 現只是5.1/7.1 前置聲道解碼後再以傳統十倍放大後，經Variable Resistance(Volume) 將訊息調節入 No. 26 Single ended input，然後再次十倍放大，經No. 26 Variable Resistance (Volume)，(但永遠調至12點位置)，由Pre out 入332。
這種行徑和0.1聲道(超低頻)完全一樣，Sub 仔都有volume 制呵。。
有興趣來以下發表一下。You are really welcome.{:1_249:}
http://www.post76.com/discuss/viewthread.php?tid=51656&extra=page%3D1
本帖最後由 Big_McIn 於 2010-10-26 02:47 編輯
咁又無喎...佢天資都幾高...教佢兩次點開機就識...而家自己開嚟睇都無問題 ...
howin 發表於 2010-10-25 08:29 http://www.post76.com/discuss/images/common/back.gif
Howin,
ML 332 XLR/RCA切換：
2 SINGLE-ENDED INPUTS
These RCA connectors accept single-ended inputs from preamplifiers with
single-ended (RCA) outputs. Single-ended input signals are converted to
balanced signals immediately upon being received at the amplifier, and are
handled as balanced signals thereafter.
If your preamplifier does not support balanced connection to the power
amplifier, connect the single-ended output of your preamplifier to the RCA
input on the amplifier. To reduce the chance of noise pickup at the (otherwise
unterminated) inverting input of the XLR, insert the provided Ushaped
shorting strap between pins #1 and #3 of the XLR connector. (As
delivered from the factory, this shorting strap is already installed.)
與本人Pass Labs X600.5 完全一樣，Pioneer LX 82 Front out(RCA)可直入 332 RCA In，準備两粒XLR Male Plugs，將Pins 1 and 3相連，睇AV時將No. 26 XLR 線抽出，插入該两粒XLR Male Plugs。
RCA線插入 332 RCA In, 正常聽Stereo 用XLR與No. 26相連，因LX 82 off，不會有interference。
PS: 本人仍有該两粒XLR Plugs，回港可試玩。
講笑咩.....同你個d邊有得比
howin 發表於 2010-10-25 07:45 AM http://www.post76.com/discuss/images/common/back.gif
I don't have 5.1{:6_203:}
Howin,
ML 332 XLR/RCA切換：
2 SINGLE-ENDED INPUTS
These RCA connectors accept single-ended inputs ...
Big_McIn 發表於 2010-10-26 02:43 http://www.post76.com/discuss/images/common/back.gif
大哥類似你呢個方法我一開始都有諗過...Stereo經xlr..av經rca直入332...但就唔想又蚊又插...無論聽歌睇戲都插哂兩條線...但賣機俾我嗰個強烈建議我唔好咁做...佢話會燒機...其實諗諗下又係...因為26設計係無得off嘅...當我睇AV個時變左兩邊都有singal入332...咁樣想唔燒都幾難{:6_174:} ....如果想唔經兩部前級要教兩個volume咁麻煩...唯一辦法我諗只有你呢個....
shadam 發表於 2010-10-26 00:07 http://www.post76.com/discuss/images/common/back.gif
唔好玩我啦沙胆兄....我個d平野只可以叫人有我有....同你個D爭得遠啦{:6_123:}
I don't have 5.1
xover 發表於 2010-10-26 07:42 http://www.post76.com/discuss/images/common/back.gif
你唔玩o者....要玩你肯定唔講得笑...睇你stereo幾堅就知{:6_146:}
本帖最後由 Big_McIn 於 2010-10-26 08:54 編輯
]因為26設計係無得off嘅...當我睇AV個時變左兩邊都有singal入332...
howin 發表於 2010-10-26 07:50 http://www.post76.com/discuss/images/common/back.gif
No, 當你睇AV時要抽出接No. 26 XLR，插入2個XLR Plugs，因用Single ended 時，XLR #1 and #3需要連接，這時332 只由RCA和LX 82接通。
To reduce the chance of noise pickup at the (otherwise
unterminated) inverting input of the XLR, insert the provided Ushaped
shorting strap between pins #1 and #3 of the XLR connector. (As
delivered from the factory, this shorting strap is already installed.)
No.26 is completely disconnected to your whole system no matter it's on or off.
當聽stereo時雖然RCA接上LX 82,但它是OFF的。
Anyway,對老細來講，so far so good！ {:6_174:}
PS: I've got some updated pictures you want to see.
因為26設計係無得off嘅...當我睇AV個時變左兩邊都有singal入332...
howin 發表於 2010-10-26 07:50...
Big_McIn 發表於 2010-10-26 07:57 http://www.post76.com/discuss/images/common/back.gif
我明你意思...我所講嘅係我當初嘅天真諗法...無論聽歌睇戲都插住兩組線...以為只要聽歌睇戲唔一齊開就無事{:6_136:} ...如果用你個方法就一定無問題..不過要每次睇戲要蚊左條xlr插返對xlr male plug...但咁樣就可以免除過兩份pre-amp同教兩邊volume嘅麻煩.....
{:6_200:}{:6_200:}獻醜?
呢個問題我同我個裝修朋友之前都諗過...我睇過大部份投影機尺寸都唔會闊得過我呢部...但大部份都長 ...
howin 發表於 2010-10-25 17:36 http://www.post76.com/discuss/images/common/back.gif
咁夠位就冇問題了, 正!
