論壇 › 家庭影院 › Pioneer VSX-1020-K 搭 Mordaunt Short Alumni 5.1 (最後決定搭QUAD LITE)

karl1985 發表於 2010-8-26 13:54

Pioneer VSX-1020-K 搭 Mordaunt Short Alumni 5.1 (最後決定搭QUAD LITE)

本帖最後由 karl1985 於 2010-9-6 21:45 編輯

小弟剛剛接解音響
想請問一下各位大大
如果Pioneer VSX-1020-K 搭 Mordaunt Short Alumni 5.1呢個組合好唔好
部AMP夠唔夠力推?

部1020的SPEC


Alumni 2 SPEC

Sensitivity       86dB (1 Watt input)
Frequency response       100Hz - 20kHz
Nominal impedance       4 - 8 Ohms
Power       15 - 80W recommended

Alumni 5 SPEC

Sensitivity       86dB (1 Watt input)
Frequency response       100hz - 20kHz
Nominal impedance       4 - 8 Ohms
Power       15 - 80W recommended

Alumni 9

Sensitivity       Line in: 270mV (for max output)
High level in: 2.15V (L&R driven for max output)
Frequency response       35Hz - 200Hz
Power       120W amplifier built in
Mains voltage       220 - 240 volts 50Hz or
110 - 120 volts 50 - 60Hz
Power consumption       240 Watts

成套個樣:

shing517 發表於 2010-8-26 13:59

夠哂~~放心~~

karl1985 發表於 2010-8-26 14:00

仲有一個問題...
其實隻subwoofer係點駁法?
麻煩各位師兄教一教小弟{:6_128:}

karl1985 發表於 2010-8-26 14:01

夠哂~~放心~~
shing517 發表於 2010-8-26 13:59 http://www.post76.com/discuss/images/common/back.gif

唔該晒師兄{:6_128:}
師兄可唔可以教下小弟點睇到夠{:6_122:}

shing517 發表於 2010-8-26 14:11

我都唔係好識架咋...不過我睇個喇叭power recommendation 同埋amp 個 channel output應該ok~ subwoofer 用一條訊號線插係amp 個subwoofer 位駁去subwoofer 既left input 就ok~

ccwoliver 發表於 2010-8-26 14:37

用同軸線或subwoofer專用線接駁至圖中輸入便可。

taxman123 發表於 2010-8-26 14:52

Please tell us the price of Alumni 2 , 5 & 9
Thanks

shing517 發表於 2010-8-26 14:57

Please tell us the price of Alumni 2 , 5 & 9
Thanks
taxman123 發表於 2010-8-26 14:52 http://www.post76.com/discuss/images/common/back.gif


一套買好似6k 咁上下~~

karl1985 發表於 2010-8-26 16:38

用同軸線或subwoofer專用線接駁至圖中輸入便可。
ccwoliver 發表於 2010-8-26 14:37 http://www.post76.com/discuss/images/common/back.gif

原來係插個度{:6_128:}
唔該晒師兄
見1020張圖無寫到
我驚到時買左唔識插{:6_122:}

karl1985 發表於 2010-8-26 16:38

成套Alumni 5.1好似5k幾

查看完整版本: Pioneer VSX-1020-K 搭 Mordaunt Short Alumni 5.1 (最後決定搭QUAD LITE)