回復 101# Benson
thanks ching ~ 報告埋燒印會唔會唔散~ thanks ~
wo so cheap wor, 9xxx 50"plasma made in korea 5 年保 真係平{:1_351:} Very good price!
我之前的 Hitachi 42" 巴士麻 壞了一次, 花了HK$2500
Benson 發表於 2010-6-28 22:24 http://www.post76.com/discuss/images/common/back.gif
ching 年多前我也係用了HK$2500 維修過1次，金毛哥哥幫我維修嘅。
我現時用viewsonic stb 1080i 去睇高清，我都想換隻 mtv 用1080p睇吓有幾靚。
今晚煲碟,明天報告
Benson 發表於 2010-6-28 23:03 http://www.post76.com/discuss/images/common/back.gif
benson hing :
我都明天送貨, 等你消息 24P 反應如何
有機會大家交流下較機心得{:6_183:}
各位CHing, 請問PS3如何調至BD 24P?是否把 Video Output Format: 1080p 24 set "off"?
我三個options: "automatic", "off", "on" 試看過, 全部滿意 Bluray-阿凡達的表現
暫時沒有死點和燒印問題{:1_351:}
benson hing :
我都明天送貨, 等你消息 24P 反應如何
有機會大家交流下較機心得 ...
timmy 發表於 2010-6-29 11:19 http://www.post76.com/discuss/images/common/back.gif
Timmy Hing,
今日30/6高試放榜, 記得交流LG50PK550試驗成績...
回復 106# Benson
BENSON HING :
已收機了, 初步感覺同你一樣, 睇碟效果一流 , 我都係用PS3睇 , 但你有無覺得睇電影好快出現燒印{:6_201:}
各位CHing, 燒印問題可參考以下報告:
Usually it takes at least about 100-150 hours of use before you get the best picture quality from a plasma display, nevermind the brand. For that reason, it is always good to arrange a serious calibration (and/or test) when the display has 200 hours or more.
The best way I suggest you for doing the initial break-in, for those who are interested in that, is to use a 100 IRE pattern (full white), and run it on the display for about 2 hours for session. Then turn off the TV and leaving it off for 1 hour or more, so that the electronics and the panel get perfectly cool, and then repeat the session, and so on. Contrast should be set around 70%, and power saving function to low (or to off if the "low" option is not available). You can also use the internal timer from the OSD to turn off the TV (I don't know how it works on these new models). About 100 hours of break-in by using that system, and you will be OK
The interesting thing on the LGs plasma, on the previous 2008 and 2009 series, and I guess it is the same for these new models, is that you have that 100 IRE (full white) pattern available from the OSD. On the E.U. 2008 models its name was "refreshPDP". They offer it to clean the display in case of bad IR, but it is also perfect for the break-in
BTW, there should be also the "Orbiter" (I don't know the exact name on these new U.S. models) function available from the same OSD setup (if you don't find it on that setup, search for it in the PDF manual). It helps to reduce image retention (IR), and it is always a very good thing to use it during gaming.
回復 107# timmy
睇戲都燒印?{:6_185:}
講到好正咁, 我上次見播d試片又唔特別好, 但就一定唔係差o個d, plasma真係有返d質素~
9.2k, 真係值得一試,...
timka 發表於 2010-5-3 15:27 http://www.post76.com/discuss/images/common/back.gif
已買左!禁既價錢!有禁既質素!真係無得輸!!!!超得!!!{:1_335:}
