awc1216 發表於 2020-8-27 13:44
明白，同埋師兄係用xlr定rca呀？因為我用金仔amp，怕用xlr個相位唔啱...
咁你要問wlkie 了
本帖最後由 wklie 於 2020-8-27 17:28 編輯
awc1216 發表於 2020-8-27 13:44
明白，同埋師兄係用xlr定rca呀？因為我用金仔amp，怕用xlr個相位唔啱...
When using Lumin XLR analog output to Accuphase, you may invert the phase in Accuphase if it offers a phase selection switch.If your Accuphase model does not have a phase setting, alternatively you can also use Lumin app to turn on the Lumin built-in Invert Phase function (for analog output).
This solves the 相位 difference between Lumin pin 2 hot and Accuphase pin 2 cold problem.
wklie 發表於 2020-8-27 17:25
When using Lumin XLR analog output to Accuphase, you may invert the phase in Accuphase if it offer ...
其實喺source㩒反相，同喺金仔度㩒反相有冇分別？因為我以前部cdp都係反相，代理叫我喺cdp度㩒反相好過喺金仔㩒，但原因同原埋我就唔知了
本帖最後由 wklie 於 2020-8-28 00:22 編輯
That will be a comparison between the digital invert phase in Lumin T2 vs the analog invert phase in amp.You may try both methods and see which sounds better to you, using music with a lot of bass.
wklie 發表於 2020-8-27 18:49
That will be a comparison between the digital invert phase in Lumin T2 vs the analog invert phase in ...
Well noted, thx Ching.
toms110 發表於 2020-8-23 19:06
試咗5部機, 雖然唔係同一設定, 但呢個價位, 對我嚟講係超值加誠意之作...
唔記得問師兄，部機邊度入手呀同幾錢呀？
awc1216 發表於 2020-8-28 03:02
唔記得問師兄，部機邊度入手呀同幾錢呀？
價錢就唔透露喇，應該個個問都係爭幾百蚊，我係喺友誠嘅馬榮成漫畫嗰度入手{:8_394:}
awc1216 發表於 2020-8-27 13:44
明白，同埋師兄係用xlr定rca呀？因為我用金仔amp，怕用xlr個相位唔啱...
師兄, 証實咗Lumin係1地2正3負, Luxman同金仔係1地2負3正{:6_182:}
toms110 發表於 2020-8-31 15:35
師兄, 証實咗Lumin係1地2正3負, Luxman同金仔係1地2負3正
收到，即係要㩒反相了😂
見師兄開箱圖自己忍唔住照跟入左部!!{:6_123:}
