Help: i-cable HD STB 過唔到AVamp
各位Ching:新到i-cable HD STB，
HDMI 直接去TV -> OK
HDMI 去HDMI switch box 去TV -> OK
HDMI 去AVamp 的HDMI in去TV-> 無聲畫面閃
如果唔接AVamp 的HDMI out 去TV -> 有聲
己試過其它devices，如O記STB, PS3 都OK
唔知有無人知道是什麼原因
HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP{:1_247:} 我情況同你差唔多,最初師傅裝機o既時候,
我叫佢將HDMI入amp然後上爬士麻有聲有影,
跟住有次想用投影機睇高清足球,
但發覺無影無聲,於是我自行嘗試調校有線STB機輸出,
點知唔校由自可,一校連爬士麻都無埋聲畫,
於是我就call有線求助,佢後尾叫o左個師傅上o黎,
但原來佢唔係師傅,只係帶過另一部機上o黎俾我試,
不過試完一樣唔work,都只係好似你咁可以直出爬士麻,
由於暫時未有波睇,所以未理佢.
有次我將經歷講俾我朋友知,佢試過一樣係上唔到投影機,
不過呢次有線幫佢換過個盒之後又可以用投影機出,
真係搞到我都唔知係邊度出現問題啊......{:6_168:}
有時間再打電話去有線技術支援傾傾先.......{:6_146:} i do have the exact problem like you, when i connect my stb to marantz sr-7002 amp it will works at beginning but after if i turn off tv and back on again a while,only thing i get is a flashing screen but no picture, because of this issue i did call the cs from cable tv and the guy told me that is because my signal strength is not strong enough and ask me to reboot the stb, ok then i follow his instruction, but no use problem stand. For now i can only unplug the power socket from wall if i still want to connect to amp. I feel not lonely now because i am not the only one who have this problem that mean cable tv may take this seriously {:1_344:} I use HDMI cable to connect Cable Box to TV directly,
for amp
cable box > component cable and audio cable > amp > HDMI > TV
I think there is a technical issue with cable box, unless they change the box or upgrade the firmware nothing else you can do to resolve the HDMI problem. The component cable work prefectly at this moment for my pioneer LX71. 3# charliebeagle
How to reboot the stb? unplug the power and plug it back on 6# charliebeagle
Oh! so easy! I try later........{:6_184:} I will insist i-cable to fix it and thanks all chings' information
Thanks agian
頁:
[1]