rchan0901 發表於 2017-10-21 13:39

請教PS4 Pro 畫面輸出2160 YUV420 & 2160 RGB分別

師兄們,近日在試我部LG 65UB9800 (2014款)無HDR 4K TV時,PS4 Pro 經 X5200W 去年電視,ps4 pro畫面輸出設為自動,見到畫面訊號為RGB 4:4:4, 而AV AMP見到Colour space為RGB 4:4:4, 而pixel depth為由8bit

但昨天試將ps4 pro轉為YUV420輸出時,AV AMP見到Colour space為YCbCr 4:2:0, 而pixel depth轉為12bit.

請問從上述資料顯示,PS4 pro出YUV4:2:0 (YCbCr 4:2:0 12bit)定 RGB 4:4:4 8bit 好D呢,D數字又點解呢?



rchan0901 發表於 2017-10-21 14:50

2160p RGB is ALWAYS better than 2160p YUV420, unless your TV/monitor has compatibility issues.

RGB and YUV420 here are compression modes. RGB is uncompressed, while YUV420 compresses video data to 1/2 of their original size.

YUV420 is there because some old 4K TVs support only HDMI 2.0 metadata, but not HDMI 2.0 bandwidth of 18Gbps. However, fully uncompressed 2160p 8-bit (SDR) RGB video requires 17.82Gbps (at 60fps, same below), which exceeds the limit of those old TVs. On the other hand, 2160p 8-bit (SDR) YUV420 video requires only 8.91Gbps, and will work without any problem. In such cases, players are not able to choose 2160p RGB at all, due to bandwidth limits.

For new 4K TVs that support HDMI 2.0 bandwidth of 18Gbps, it is obviously that they are capable for both 2160p 8-bit (SDR) RGB (17.82Gbps) and 2160p 8-bit (SDR) YUV420 (8.91Gbps). To get better video quality, we have no reason to choose YUV420 over RGB.

For HDR videos, it’s a bit tricky. Theoretically, uncompressed 2160p 10-bit (HDR) video requires 22.28Gbps and therefore exceeds the limit of HDMI 2.0, so it won’t work at all. On the other hand, 1/2 compressed 2160p 10-bit (HDR) YUV420 video requires only 11.14Gbps, and will obviously work without any problem.

I guess many people made a mistake here. At first, I too thought that I could get 10-bit (HDR) video only with output mode set to 2160p YUV420 because 2160p HDR RGB exceeds the bandwidth limit. However, when you play HDR contents with output mode set to 2160p RGB, PS4 Pro actually outputs in 2160p 12-bit (HDR) YUV422 (17.82Gbps). So, what is this mode?

As we mentioned before. RGB is uncompressed, while YUV420 is 1/2 compressed. Similarly, YUV422 is 2/3 compressed. It provides better video quality than YUV420 but not so good as RGB. The HDR mode used in PS4 is 10-bit HDR. However, there is no video mode in HDMI 2.0 standard for 10-bit YUV422, so 12-bit YUV422 video mode is used instead, where 2 bits are padded with zero.

In sum, 2160p 12-bit (HDR) YUV422 is the best video quality Sony could provide given this and that limits of HDMI 2.0, and you could only get it when PS4’s video output is set to 2160p RGB. If you choose 2160p YUV420, compared to 2160p RGB, you will get only 1/2 video data for SDR contents, and only 3/4 video data for HDR contents, respectively.

從網上找到的,很有參考性

mark1 發表於 2017-10-22 11:37



要睇返您source 同display 既輸入輸出係咩, 要對返,
可考慮以下文章

http://lysandria1985.blogspot.hk/2014/06/htpc14.html?m=1#more

Anthony :

https://post76.hk/forum.php?mod=viewthread&tid=259500&highlight=4%3A4%3A4&mobile=2{:1_352:}


https://youtu.be/7JYZDnenaGc
Skip 到2分中開始睇 一睇就明 444 420 係咩

rchan0901 發表於 2017-10-22 12:10

thx ching
頁: [1]
查看完整版本: 請教PS4 Pro 畫面輸出2160 YUV420 & 2160 RGB分別

重要聲明:本討論區是以即時上載留言的方式運作,Post76玩樂討論區對所有留言的真實性、完整性及立場等,不負任何法律責任。而一切留言之言論只代表留言者個人意 見,並非本網站之立場,讀者及用戶不應信賴內容,並應自行判斷內容之真實性。於有關情形下,讀者及用戶應尋求專業意見(如涉及醫療、法律或投資等問題)。 由於本討論區受到「即時上載留言」運作方式所規限,故不能完全監察所有留言,若讀者及用戶發現有留言出現問題,請聯絡我們。Post76玩樂討論區有權刪除任何留言及拒絕任何人士上載留言 (刪除前或不會作事先警告及通知 ), 同時亦有不刪除留言的權利,如有任何爭議,管理員擁有最終的詮釋權 。用戶切勿撰寫粗言穢語、誹謗、渲染色情暴力或人身攻擊的言論,敬請自律。本網站保留一切法律權利。權利。