X7200WA+UDP203出唔到Dolby Atmos
AMP用天龍X7200WA最新firmware,Oppo UDP203最新firmware,巳關第2聲道,巳set bitsteam,悍戰太平洋Ultra HD 4K只能出Dolby TrueHD.(但葉問3可出DTS:X)之前用Pioneer BDP51FD+x7200wa Sammi演唱會可出Dolby Atmos就算set 5.1
Pls help{:1_332:} 播時amp顯示咩制式？ Dolby TrueHD 試吓响amp度set有atmos speaker ，睇下點 already set Atmos speaker and call Denon they said because I just have 5.1 only wor....
I remember before use Sammi Blu-ray can light up 'Dolby Atmos'
But today i test Sony S360 and Oppo 203 both cannot show Dolby Atmos just Dolby TrueHD... alexwong2k 發表於 2017-8-2 23:54
already set Atmos speaker and call Denon they said because I just have 5.1 only wor....
I remember b ...
實際有幾多隻speaker先？
我試過一定要amp assign 有height channel 佢先有可能著到Atmos, 否則部機唔會理你。 alexwong2k 發表於 2017-8-2 23:54
already set Atmos speaker and call Denon they said because I just have 5.1 only wor....
I remember b ...
其實你情況係正常喎，因為始終你冇atmos 喇叭，就算部amp照解都唔知將天空聲道放響邊度出，
預期唔知放邊，不如直出ture HD女好過啦
joe_ho2 發表於 2017-8-3 17:05
實際有幾多隻speaker先？
我試過一定要amp assign 有height channel 佢先有可能著到Atmos, 否則部機唔會 ...
因為記得之前未up firmware得5.1係show到(未set Audyssey)Dolby Atmos.Up完後(set埋 Audyssey)又係5.1淨係出到DTS:X或TrueHD or DTS MASTER.
就算set Atmos speaker一樣chock唔到Dolby Atmos...係未一定要connect天花speaker先出到? alexwong2k 發表於 2017-8-4 11:51
因為記得之前未up firmware得5.1係show到(未set Audyssey)Dolby Atmos.Up完後(set埋 Audyssey)又係5.1淨 ...
你係咪真係有connect, 我諗部機未必知。。但肯定要amp assign 有height channel, 同set 做small(例如front height)，等部機以為你真係連左喇巴佢先會寫atmos.
但嘅然你無heigh channel, 就算出到atmos 都應該無用。
頁:
[1]