djaddy
發表於 2009-11-30 15:54
U mean u want me to sell my DIY cables? {:6_122:}
見笑,見笑.
djaddy
發表於 2009-11-30 16:35
hi djaddy ,快0的係76呢度推廣下多0的灌沙線材俾大家,助推{:1_263:}
ken2000 發表於 2009-11-30 15:46 http://www.post76.com/discuss/images/common/back.gif
Actually, all chings w/ 83803 must try 灌沙! The original teflon coating is very poor. 灌沙 makes one hell of a difference.
ken2000
發表於 2009-11-30 16:44
agree........我都有一條{:1_337:}
我考慮條訊號線灌沙,唔知Djaddy兄點睇呢{:1_342:}
djaddy
發表於 2009-11-30 17:02
The purpose of 灌沙線 is to lower or eliminate harmonic vibrations & EMF that is generated during the flow of electricity. Compared with power cables, the EMF & harmonic vibrations are much lower. However, this doesn't mean they dun exist. There are various techniques used to eliminate the EMF & harmonic vibrations in 訊號線 (IC).
Give it a test by all means, but it may be harder to seal off both ends of the IC compared with pc.
Looking forward to your report!
ken2000
發表於 2009-11-30 17:15
條線咁重,唔知個焊位頂唔頂得順,都係諗諗先{:1_258:}
djaddy
發表於 2009-11-30 17:18
yes, indeed it is quite high risk. I prefer to seek alternatives.
djaddy
發表於 2009-11-30 21:11
DIY 灌沙 will provide better shielding for all PCs with poor insulation. As previously observed, NanoTech 301 & 302 has basically no shielding. Other chings mentioned that 302 is great for DIY灌沙. Emm... but it's a bit expensive for my interest.
ram
發表於 2009-11-30 21:45
{:6_193:} 詳盡清楚!!!!!!
djaddy
發表於 2009-12-1 05:22
Thank you for your complements.
sayye@h
發表於 2009-12-1 10:49
Actually, all chings w/ 83803 must try 灌沙! The original teflon coating is very poor. 灌沙 makes one hell of a difference.
djaddy 發表於 2009-11-30 16:35 http://www.post76.com/discuss/images/common/back.gif
咁即係要成條線皮連網去左佢???{:6_141:}