https://www.bhphotovideo.com/c/product/1081938-REG/onkyo_ht_s3700_5_1_channel_home_theater_receiver_ ...
如果我用203播4k file,即係可以唔洗HDCP2.2?
(Post76 Android 手機版送出) thanks
(Post76 Android 手機版送出) Szelong 發表於 2016-12-10 19:57 static/image/common/back.gif
如果我用203播4k file,即係可以唔洗HDCP2.2?
(Post76 Android 手機版送出)
冇版權 copyright 就會播到 HKWAIYIN 發表於 2016-12-10 20:42 static/image/common/back.gif
冇版權 copyright 就會播到
咁可以唔洗咁急換amp
(Post76 Android 手機版送出) 其實咁樣講會容易明白啲。若然4K信號源係有用HDCP 2.2 保護，那麼你的HDMI就必須係2.0a + 有HDCP 兼容。否則便看不到了。
但如果4K信號只是由FULL HD 倍線去4K 60hz, 咁有冇 HDMI 2.0都冇所謂。
(Post76 Android 手機版送出) 呢個問題我都有思考過，因為我而家用緊Y記3040，佢只支援4k 60p,行唔到HDR高對比，但應該都出到4k的，只係出唔到HDR,我都訂了oppo203,到時諗住聲畫分開行，那應該是沒有影響到我，3040只是舊一代，就已經行唔到HDR & hdcp2.2 lo-b 發表於 2016-12-12 10:39 static/image/common/back.gif
呢個問題我都有思考過，因為我而家用緊Y記3040，佢只支援4k 60p,行唔到HDR高對比，但應該都出到4k的，只係 ...
Ching,
想問下TV是樂聲cx700 吾 support HDR, amp系pioneer舊model lx82, 如果換oppo203的話可以怎樣用盡4k？
是否要換hdmi ?
Sorry, 對影音認識不足。 本帖最後由 wklie 於 2016-12-12 21:16 編輯
If the UHD Blu-ray player has dual HDMI output, connect the video HDMI direct to a HDCP 2.2 TV.This way you don't need the Amp to support HDCP 2.2.
If the UHD Blu-ray player (single) HDMI output is connected to the AMP, then the AMP must support HDCP 2.2 for it to work.Any old Amp that advertises 4k/60p but does not support HDCP 2.2 is completely useless for UHD Blu-ray.
UHD Blu-ray connection to non-HDR 4K TV is not a problem as long as the TV supports HDCP 2.2.In this configuration, the UHD Blu-ray player will convert the HDR to SDR for output to TV.
頁:
1
[2]