請問部89食不同的DTS7.1時，板面有時顯示DTS，有時顯示DTSHD，是否正常？{:6_141:}
用USB UPDATE，出現 ERROR 1 ，SC-LX59
Reset 咗，試用LAN UPDATE，都唔掂，又係ERROR 1，連聲都冇埋!
立月迡 發表於 2016-11-20 19:04 static/image/common/back.gif
用USB UPDATE，出現 ERROR 1 ，SC-LX59
Reset 咗，試用LAN UPDATE，都唔掂，又係ERROR 1，連聲都冇埋! ...
買咗部機3個月LX59，結果係update ERROR 要搬部AMP 去尖沙咀，「維修」一、兩個星期！
立月迡 發表於 2016-11-21 13:27 static/image/common/back.gif
買咗部機3個月LX59，結果係update ERROR 要搬部AMP 去尖沙咀，「維修」一、兩個星期！ ...
我部59維修兩天可取機
給各位參考LX59 升級方法
我試了lan 及用apps through wifi update 都失敗
最後用USB UPDATE 成功
你要準備
1. usb 2.0 手指
2. Format 為fat 32 格式
3. 只放2 個file,bat 及bin
祝成功update
raylee 發表於 2016-11-25 09:29 static/image/common/back.gif
給各位參考LX59 升級方法
我試了lan 及用apps through wifi update 都失敗
我10月底買了LX59, 幾天後用USB upgrade成功
AAA1 發表於 2016-11-5 12:35 static/image/common/back.gif
After update
No 192 kHz up sampling for 2 channels
Sound a bit muddy with better bass
Yes, I also found the sound of 2 channel is a bit muddy. Any setting can be made to fix it?
ahchaugoh 發表於 2016-12-3 23:35 static/image/common/back.gif
Yes, I also found the sound of 2 channel is a bit muddy. Any setting can be made to fix it?
Try to set low freq crossover to 80hz
(Post76 Android 手機版送出)
本帖最後由 ahchaugoh 於 2016-12-4 00:42 編輯
AAA1 發表於 2016-12-4 00:07 static/image/common/back.gif
Try to set low freq crossover to 80hz
(Post76 Android 手機版送出)
Already set to 80 Hz. Still a little muddy compared with previous in 2 channel stereo. Bass and surround effect are very good.
I suppose the original firmware had cut some low freq even when the speaker is set to large
So they would sound more crisp before
