19# micma
http://www.epemag.wimborne.co.uk/solderfaq.htm
Here's a summary of how to make the perfect solder joint.
1. All parts must be clean and free from dirt and grease.
2. Try to secure the work firmly.
3. "Tin" the iron tip with a small amount of solder. Do this immediately, with new tips being used for the first time.
4. Clean the tip of the hot soldering iron on a damp sponge.
5. Many people then add a tiny amount of fresh solder to the cleansed tip.
6. Heat all parts of the joint with the iron for under a second or so.
7. Continue heating, then apply sufficient solder only, to form an adequate joint.
8. Remove and return the iron safely to its stand.
9. It only takes two or three seconds at most, to solder the average p.c.b. joint.
10. Do not move parts until the solder has cooled.
你係咪就咁焊上去?
有冇上左鍚係8字頭到先?
yazhou 發表於 2009-11-19 22:12 http://www.post76.com/discuss/images/common/back.gif
我分別上左錫係8字頭及線上先....之後焊接埋一起
19# micma
http://www.epemag.wimborne.co.uk/solderfaq.htm
Here's a summary of how to make the perfect solder joint.
1. All parts must be clean and free from dirt and grease.
2. Try to secure...
djaddy 發表於 2009-11-19 22:13 http://www.post76.com/discuss/images/common/back.gif
我都好似差唔多呀...{:6_136:}
DIY好, Any improvement?
DIY好, Any improvement?
juniorx 發表於 2009-11-19 22:25 http://www.post76.com/discuss/images/common/back.gif
我覺得畫面黑位黑左...整體實左...秋記姐姐話要兩星期run-in...{:6_122:}
唔想整到我咁...秋記有成品買
15A is good for beginners! {:6_142:}
本帖最後由 rlwk2009 於 2009-11-19 22:36 編輯
做得差唔好見笑{:6_122:}
重未買收縮膠包埋個8字頭{:6_126:}
micma 發表於 2009-11-19 22:00 http://www.post76.com/discuss/images/common/back.gif
ching 好似上唔夠錫丫，下次兩邊都要先上多少少錫，然後至焊在一起{:6_182:}
是喔,又想問普通和冷凍的大概要幾錢啊?
mimi 發表於 2009-11-19 21:59 http://www.post76.com/discuss/images/common/back.gif
普通$2X，冷凍$5X{:6_182:}
ching 好似上唔夠錫丫，下次兩邊都要先上咗錫，然後至焊在一起{:6_182:}
rlwk2009 發表於 2009-11-19 22:33 http://www.post76.com/discuss/images/common/back.gif
明白...下次落多d錫...thanks for your comment.
其實要唔要打開加番多d錫落去呀{:6_141:}
普通$2X，冷凍$5X{:6_182:}
rlwk2009 發表於 2009-11-19 22:35 http://www.post76.com/discuss/images/common/back.gif
師兄...請問可唔可以睇下你嘅成品樣給我睇下鍚嘅份量呀...thanks{:6_128:}
