論壇 › 家庭影院 › 請問Yamaha 5000點樣reset 部機回原廠設定？

dickyball 發表於 2016-2-10 20:00

請問Yamaha 5000點樣reset 部機回原廠設定？

請指教⋯⋯

Mr.Yamaha 發表於 2016-2-10 20:33

本帖最後由 Mr.Yamaha 於 2016-2-10 20:35 編輯

1 ) standby mode
2) hold on straight button
3) and other hand turn on the power
4) on body display show advance
5) select the program to initialize and select (ALL)
6) power off to factory reset !

dickyball 發表於 2016-2-10 20:45

Mr.Yamaha 發表於 2016-2-10 20:33 static/image/common/back.gif
1 ) standby mode
2) hold on straight button
3) and other hand turn on the power


Thank you very much{:6_162:}

playgun31 發表於 2016-2-10 21:12

Mr.Yamaha 發表於 2016-2-10 20:33 static/image/common/back.gif
1 ) standby mode
2) hold on straight button
3) and other hand turn on the power


hi,請問rxv679要用咩模式,上前置喇叭先可一起出聲?

ykluk 發表於 2016-2-11 10:08

playgun31 發表於 2016-2-10 21:12 static/image/common/back.gif
hi,請問rxv679要用咩模式,上前置喇叭先可一起出聲?

小弟無用過rxv679, 不過佢係7.2 channel, 如果你要用上前置, 咁應該係要off咗surround back, 用zone 2既位assign比front presense用, 再喺setup裡面設定speakers, 咁就應該用到, 用咩模式無關~~!! {:8_376:}

playgun31 發表於 2016-2-11 11:14

ykluk 發表於 2016-2-11 10:08 static/image/common/back.gif
小弟無用過rxv679, 不過佢係7.2 channel, 如果你要用上前置, 咁應該係要off咗surround back, 用zone 2既 ...

Thx!ching

dickyball 發表於 2016-2-11 16:27

Mr.Yamaha 發表於 2016-2-10 20:33 static/image/common/back.gif
1 ) standby mode
2) hold on straight button
3) and other hand turn on the power


又想問 用機頂盒用HDMl 入amp去電視
點set先可以唔開amp情況下而電視有聲有畫面出？
而家得畫面無聲

Mr.Yamaha 發表於 2016-2-12 12:55

dickyball 發表於 2016-2-11 16:27 static/image/common/back.gif
又想問 用機頂盒用HDMl 入amp去電視
點set先可以唔開amp情況下而電視有聲有畫面出？
而家得畫面無聲 ...

Manual page 114.HDMI > Standby Through set to "ON"

dickyball 發表於 2016-2-12 16:56

Mr.Yamaha 發表於 2016-2-12 12:55 static/image/common/back.gif
Manual page 114.HDMI > Standby Through set to "ON"

Standby Through set to "ON"
Set 咗 得畫面無聲

查看完整版本: 請問Yamaha 5000點樣reset 部機回原廠設定？