AAA1 發表於 2016-1-18 18:39 static/image/common/back.gif
I just change the speaker setting from 7.2.2 to 9.2.2 in the amp only and the correct Neo X is dis ...
Neo X BD 同 7.1 BD 係相同 format, 只係你 setting 問題，你咁 set 法任何機都冇分別，吾再補充啦，你自己去 DTS 網搵答案啦⋯⋯
AAA1 發表於 2016-1-18 18:39 static/image/common/back.gif
I just change the speaker setting from 7.2.2 to 9.2.2 in the amp only and the correct Neo X is dis ...
我啱啱又再試過
你要知道Neo:X係一個upmix功能
我依家試係用7.1.2setup
行dts5.1BD可以用neo:x upmix上7.1
個由於我已經係7.1.2
行dts7.1BD就唔存在upmix上7.1
除非好似你咁就可以
由7.1 Neo:X upmix上 9.1
如果你要up上天花
就要等升級上dts:X有Neural:X先得
MDLP 發表於 2016-1-18 22:08 static/image/common/back.gif
啱啱試完無問題
你地檢查咗個router先啦
Finally find the 5GHz network by fixing to band 1 channel (20MHz) in router
Normal it should work in 20/40MHz
So some compatibility issue for the driver in Pioneer amp
No other 5Ghz wifi devices I own have such problem
By doing this, the wifi speed is limited for other connection especially ac clients
AAA1 發表於 2016-1-18 23:02 static/image/common/back.gif
Finally find the 5GHz network by fixing to band 1 channel (20MHz) in router
Normal it should work...
我上面都講同個channel有關係好正常
有基本網絡常識都知道
你講什麼speed limited
祇係你唔識set啫
就算再退一萬步行返2.4GHz B/G
去到DSD 5.8Mhz聲音串流都無大影響
MDLP 發表於 2016-1-18 22:58 static/image/common/back.gif
我啱啱又再試過
你要知道Neo:X係一個upmix功能
我依家試係用7.1.2setup
You are right
I test with 5.1 and 7.1 discs
So whether it is NEO X encoded or not does not matter
Anyway, Neo X is a dying format
本帖最後由 AAA1 於 2016-1-18 23:33 編輯
MDLP 發表於 2016-1-18 23:16 static/image/common/back.gif
我上面都講同個channel有關係好正常
有基本網絡常識都知道
你講什麼speed limited
If the channel is limited to 20MHz, the wifi speed will be much slower than 40/80MHz for AC clients
Same as 11n
Just like 2.4 GHz for 11b, g network, no more 11n
Of course, some high end router has 2.4GHz x 2-3 and 5GHz x2-3
AAA1 發表於 2016-1-18 23:30 static/image/common/back.gif
If the channel is limited to 20MHz, the wifi speed will be much slower than 40/80MHz for AC client ...
我個NRouter 5GHz接LX89行到40Mhz
LX58亦講明係N
AC慢過N係正常
我亦唔相信你今時今日
比壹皮野咁大把
買都個AC client既AVamp
有方法set到亦有方法搵到
你屋企最佳channel/Mhz
不過唔花時間講
一陣一次過LX58無晒"bug"
怕你會失落唔開心{:1_338:}
本帖最後由 AAA1 於 2016-1-18 23:53 編輯
MDLP 發表於 2016-1-18 23:44 static/image/common/back.gif
我個NRouter 5GHz接LX89行到40Mhz
LX58亦講明係N
AC慢過N係正常
The problem is because you use N router
And you mean just limited to 40MHz bandwidth with connection?
AC should be much faster than N
That is why Pioneer should update the driver of its wifi rather than just carry everything over the past few years
For Neo X, I don't know other brands are similar or not
But just weird for such setting, as it has some DSP options as well
AAA1 發表於 2016-1-18 23:51 static/image/common/back.gif
The problem is because you use N router
And you mean just limited to 40MHz bandwidth with connecti ...
你要受幾個事實
1. 市面上無AV amp行AC
2. 你個AC router亦無得同時行B/G/N/AC
3. 將個1T1R/2T2R CLIENT駁去無論N或AC3T3R都會全盤拖低有慢跟慢
你夾硬接到都無意思
所以要識點管理WIFI連接
不過我又唔會係度花時間講
For Neo X, I don't know other brands are similar or not
But just weird for such setting, as it has some DSP options as well
我都話LX58咁多"北"
不如賣咗佢換Y/D/M/O
是旦一部玩吓咪先囉
