new hand for SVS?
HOW TO SET UP THE PB-12 PLUS WOOFER IS THE BEST ?(NEW BUY)CROSSOVER?(DISABLED OR ENABLED)(80 OR 120)
PHASE?(0 OR 180)
GAIN?
SUBSONIC FILTER?(I DON'T KNOW)
ANY BROTHER HELP ME
I'M USE 4308A AND 2500BTCI PLAYER first of all, plz read the manual carefully before enjoy your new toy...
some hints for the setup:
CROSSOVER < DISABLED, then set LFE of av amp at 80Hz as beginning
PHASE <0 for in parallel w/ front spk
GAIN < 1/3 or 1/4
SUBSONIC FILTER < i suggest no ported as the first time, if u feel the deep bass is no good, then add 1 for the test is set LEF+MAIN
GAIN IS HALF
SUBSONIC SET ? 16, 20 OR 25 is set LEF+MAIN
GAIN IS HALF
SUBSONIC SET ? 16, 20 OR 25
ray 發表於 2009-10-28 09:47 http://www.post76.com/discuss/images/common/back.gif
Subsonic is the high pass cut-off below 16Hz, 20Hz, or 25Hz.
U should refer to your manual, the cut-off freq. should be related to how many ported u use. IF THREE PORTS AND TWO PORTS ?
IS 25 AND 20
IS SET LEF + MAIN OR LEF ONLY NOW SET PHASE IN 0 BUT I FELL THE BASS NOT ENOUGH May be you post your AV Amp LFE channel level and cross overs, so that we can make some guesses. :) I am also a new user of the SVS PB-12 plus. The amp is Denon AVC-A1HDA and the speakers are MK sound S150. Any tips to set up the SVS. Please help!{:1_351:} Set sub仔個分頻點至by pass
set Av amp 個sub仔分頻點至80hz
set隻amp播pink noise，用音壓計set返所有聲道一樣音壓
再睇自己最熟悉既戲，隨自己口味微調各聲道大細聲
咁樣各聲道我覺得會平衡d，唔會有聲道太搶
大致基本做法係咁，有錯請指教 I am also a new user of the SVS PB-12 plus. The amp is Denon AVC-A1HDA and the speakers are MK sound S150. Any tips to set up the SVS. Please help!{:1_351:}
chingkong 發表於 2009-10-29 00:57 http://www.post76.com/discuss/images/common/back.gif
又一個AVC A1HD + S150 {:6_181:}
頁:
[1]
2