請教 REL Subwoofer , High level input connect
請問用緊 REL Subwoofer 嘅師兄 High level input connect 係駁 Amp 喇叭位定直駁喇叭?因為今日我見有間鋪教我直駁喇叭,但見說明書又好似駁 Amp ?{:6_147:}
{:6_174:} 駁amp{:6_139:} 唔明{:6_141:} lawzelda 發表於 2015-7-31 00:09 static/image/common/back.gif
駁amp
請問師兄駁前置定中置?{:6_122:} 用緊嘅師兄有冇調較心得分享吓?買咗T9今日收貨
噚日去試時佢 High level input 係 直駁中置 , 佢用拔插方式試
比我聽,用左人聲豐富左同包圍感好強,我見佢 High level 同
Low level 同時插住, 但説明書又係寫住 High 同 Low level 唔好同插 {:6_243:} HKWAIYIN 發表於 2015-7-31 08:36 static/image/common/back.gif
用緊嘅師兄有冇調較心得分享吓?買咗T9今日收貨
噚日去試時佢 High level input 係 直駁中置 , 佢用拔插方 ...
Typical configuration:
Connect HIGH-LEVEL input to front speaker terminals of AMP using special REL cable.
Connect .1/LFE input input to the LFE output of AV AMP using RCA subwoofer cable.
Do not connect LOW-LEVEL input.
Set your AV AMP Front speakers to LARGE.
我插中置,我跟説明書插 請問聽歌時唔用超低音,咁晤駁係咪冇影響?
(Post76 Android 手機版送出) 本帖最後由 wklie 於 2015-7-31 18:52 編輯
神武光輝 發表於 2015-7-31 17:01 static/image/common/back.gif
請問聽歌時唔用超低音,咁晤駁係咪冇影響?
(Post76 Android 手機版送出)
Although one may only connect the LFE input and not connect the High-Level input, this wastes the major strength of REL, i.e. integrate subwoofer into other speakers (especially for music).
If your front speakers are already very good at bass such that there is no point to add bass to them, then the High-Level input should be connected to the center speaker terminal of the AV AMP, then set center speaker to Large in AV AMP.
代理威達準時送到{:6_237:}