Hmmm you also have the PCM lights up (the small one at the top next to DSD)? Meanwhile i have both PQLS and control set to ON already
madvlam 發表於 2014-12-23 14:14 static/image/common/back.gif
Hmmm you also have the PCM lights up (the small one at the top next to DSD)? Meanwhile i have both P ...
Are u ok?
(Post76 Android 手機版送出)
本帖最後由 nannan 於 2014-12-23 17:39 編輯
pkfleung 發表於 2014-12-23 14:10 static/image/common/back.gif
You may check with your HDMI set up first
1) Control mode = ON
what mean for control mode = on? ,can u explain more detail, thx
(Post76 Android 手機版送出)
There is settings for HDMI control (used for PQLS and other features).
Meanwhile I've tried almost all combinations that I am aware of, still no good - will post my findings later...
Post76
Let me explain again:
我的問題原本係VSX-924成功透過HDMI收到BDP-170的DSD訊號但就啟動左PCM conversion, 無論點set都set吾到直接DSD解碼
Tried with all Pioneer technical support advices but it's still no good, 有圖:
上兩圖顯示: 訊源係2.8MHz DSD 但係上面細字就著左PCM ("DSD PCM", circled in RED), 根據 manual 所指，直接DSD解碼應該只有DSD而吾係DSD PCM... 冇哂計, 而且set SIGSEL, PQLS or PURE DIRECT 全都冇幫助 :(
有冇邊位用P記配其他 player 而成功出到DSD直接解碼？ (重申：即係細字只有DSD，冇PCM), 謝謝...
本帖最後由 nannan 於 2014-12-24 17:22 編輯
madvlam 發表於 2014-12-24 09:46 static/image/common/back.gif
Post76
Let me explain again:
Ching, 點都set 唔到P記點dsd燈，點set 嫁？？部bdp要唔要set?
(Post76 Android 手機版送出)
nannan 發表於 2014-12-24 17:21
Ching, 點都set 唔到P記點dsd燈，點set 嫁？？部bdp要唔要set?
(Post76 Android 手機版送出) ...
In my case, BD player has to set HDMI audio to use Bitstream
madvlam 發表於 2014-12-24 09:46 static/image/common/back.gif
Post76
Let me explain again:
用pure direct mode
MDLP 發表於 2014-12-24 20:56
用pure direct mode
用咗啦 :) still no good, 請看我對上有圖個 post...
madvlam 發表於 2014-12-24 23:33 static/image/common/back.gif
用咗啦 :) still no good, 請看我對上有圖個 post...
我連dsd點燈都唔得！何解？{:6_240:}{:6_168:}
(Post76 Android 手機版送出)
