preout去合併機的迷思
我有個問題諗唔通{:6_126:} ︰我用AVamp preout 去我部合併機，而我部合併機有幾個輸入，但無指明係邊類輸入。
可用遙控set部機，set到佢轉到或轉唔到音量。我想問問︰
我set到佢轉到音量，是否代表我用緊佢個前級功能？定係無論我點set，我都只係用緊佢個後級功能？
thx各ching{:6_122:} 合併有冇av bypass or main in or processor in 嘅 RCA? yperson 發表於 2014-6-30 09:31 static/image/common/back.gif
合併有冇av bypass or main in or processor in 嘅 RCA?
無呀，只係得幾組輸入
http://www.astrasuite.com/images/audia-images/audia-fl-three-20111029-2-800x375-gray.jpg 神風怪盜kid 發表於 2014-6-30 09:34 static/image/common/back.gif
無呀，只係得幾組輸入
AF3 有bypass 的 駁去mon 再試下用av amp 教聲量
如果可以就ok la 可用遙控set部機，set到佢轉到或轉唔到音量
>>this already solved your problem i guess.just assign an input that the volume control (from the integrated amp) is disabled it should work fine.
我set到佢轉到音量，是否代表我用緊佢個前級功能
>> if you can adjust the volume from the integrated amp, then you surely ARE using the pre-amp and power-amp function from the integrated amp.
定係無論我點set，我都只係用緊佢個後級功能
>> if you are not using the power-amp後級 part, then you will have no sound, that means you are always using the power-amp part no matter what. yperson 發表於 2014-6-30 09:44 static/image/common/back.gif
AF3 有bypass 的 駁去mon 再試下用av amp 教聲量
如果可以就ok la
thx a lot
另外想問，mon 輸入即係點解？？{:6_184:}{:6_184:}
(Post76 Android 手機版送出) 神風怪盜kid 發表於 2014-6-30 11:22 static/image/common/back.gif
thx a lot
另外想問，mon 輸入即係點解？？
Should be monitor smokeyduck 發表於 2014-6-30 11:14 static/image/common/back.gif
可用遙控set部機，set到佢轉到或轉唔到音量
>>this already solved your problem i guess.just assign...
多謝你仔細講解，係咪即係話：
set到音量就代表前後級都用緊，而set 唔到就淨係用緊後級？
咁我衍生多兩個疑問：
1. avamp preout唔係已經前級左一次啦咩？再經合併機前級咪做左兩次前級過程？即係話前級過程可以多過一次？
2. 如果可以前級多次，會有咩效果？好聲左？衰聲左？話唔埋？
(Post76 Android 手機版送出) yperson 發表於 2014-6-30 11:23 static/image/common/back.gif
Should be monitor
monitor即係監聽？即部合併機唔落味精咁解？
(Post76 Android 手機版送出) set到音量就代表前後級都用緊，而set 唔到就淨係用緊後級？
>>from my understanding - YES
1. avamp preout唔係已經前級左一次啦咩？再經合併機前級咪做左兩次前級過程？即係話前級過程可以多過一次？
>>a simple and layman explanation, the preamp function is mainly provide a volume control function, just like a adjustable dimmer function for the light
2. 如果可以前級多次，會有咩效果？好聲左？衰聲左？話唔埋？
>>you can have as many preamp as you like but if you think about a signal going through a lot unnecessary paths, what will happen?data loss is highly expected i guess