恕小弟冷水，家用左測右搬搞來搞去都吾會點好。無需搵個音壓計去搞，部Amp有料到既用原裝Mic都夠曬有突，搞完一大輪，則邊多隻老虎坐響度都吾同左聲，多兩隻化骨龍又吾同，搞得幾多？
無技巧可言, 請細閱擴音機說明書 或 按如下做
如果你使用 6 omh 既喇叭,就將阻抗設置為 6 omh, 如果係 8 omh 就設為 8 omh
或你會問究竟係指邊對喇叭呢 ? 我齊有 中置, 前置, 後置, 前上置, 後中置, 各牌子, 大小, omh 都錢各有不同 ?
答察係一律以 "前置" 做標準 !
因佢祇會俾你做一次, 所以你無需擔心其他喇叭 omh 值與 "前置" omh 唔同會否聲衰或導致燒機
其實如果耳仔聽得出原來 擴音機 omh 值一路都係錯既 ! 咁我恭喜你有對全銀河系最靈敏既耳朵, 會發達都未定
擴音機 omh 值係配合喇叭功率輸出所需, 如你設定得而則喇叭出黎既聲效係鬆容一點, 否則佢就辛苦D..... 如三歲細路拎重野 !
andy3210 發表於 2014-2-15 13:26 static/image/common/back.gif
恕小弟冷水，家用左測右搬搞來搞去都吾會點好。無需搵個音壓計去搞，部Amp有料到既用原裝Mic都夠曬有突，搞 ...
部Amp有料到既用原裝Mic都夠曬有突{:1_341:} THANK YOU
akira11092 發表於 2014-2-15 14:08 static/image/common/back.gif
無技巧可言, 請細閱擴音機說明書 或 按如下做
如果你使用 6 omh 既喇叭,就將阻抗設置為 6 omh, 如果係 8 o ...
一律以 "前置" 做標準.......GOLDEN STANDARD!{:1_351:}
andy3210 發表於 2014-2-15 13:26 static/image/common/back.gif
恕小弟冷水，家用左測右搬搞來搞去都吾會點好。無需搵個音壓計去搞，部Amp有料到既用原裝Mic都夠曬有突，搞 ...
師兄，邊D Amp至有料到？{:6_238:}
akira11092 發表於 2014-2-15 14:08 static/image/common/back.gif
無技巧可言, 請細閱擴音機說明書 或 按如下做
如果你使用 6 omh 既喇叭,就將阻抗設置為 6 omh, 如果係 8 o ...
{:1_260:} {:1_260:} {:1_260:}
Please refer to P.66 of Onkyo 5010 user manual
If the impedance of any speakeris 4 ohms or more but less than 6, set the minimum speaker impedance to 4 ohms.
Speaker Impedance
`4ohms:
Select if the impedance of any speaker is 4 ohms or
more but less than 6.
`6ohms:
Select if the impedances of all speakers are between 6
and 16 ohms.
Pleas also refer to P.21 of Yamaha 2020/3030 user manual
http://download.yamaha.com/search/product/?language=en&site=usa.yamaha.com&category_id=16622&product_id=1801783
HOHOHO 發表於 2014-2-15 16:17 static/image/common/back.gif
一律以 "前置" 做標準.......GOLDEN STANDARD!
係跟細ohms數果對set，睇睇user manual {:1_260:} {:1_260:} {:1_260:}
chhanthony 發表於 2014-2-18 12:30 static/image/common/back.gif
係跟細ohms數果對set，睇睇user manual
THANK YOU CORRECTION!{:1_351:}
1. CONSIDER THE SIZE OF SPEAKERS;
THEN
2. CONSIDER THE RESISTANCE OF SPEAKERS
BUT I don't know such setting is as whole system to set once or setting one by one channel?
