kenken49 發表於 2014-2-2 01:32

EOS-1D X Firmware Version 2.0.3 (17-Dec-2013)


http://www.canon.com.hk/en/product/catalog/productItemDetails.do?prrfnbr=200344&tagID=4775


Details:
Firmware Version 2.0.3 incorporates the following functional improvements and fixes.

1. Auto focusing performance under low-light conditions has been enhanced when performing focusing before shooting in AI Servo AF mode. The enhancement comes from the improvement in tracking capability for the first image in the low-light conditions.
2. The number of release parameters settings for the "AI Servo AF 2nd image priority" AF function has been increased to enable improved AF tracking in low light or maintain consistent high frames rates during continuous shooting.
3. The number of parameters for acceleration/deceleration tracking in the AF Configuration Tool will has been increased.
4. Exposure compensation can be performed when using manual exposure and ISO Auto.
5. The minimum shutter speed limit for ISO Auto has been increased with shutter speeds up to 1/8000.
6. A new function to keep the exposure constant by altering the ISO or shutter speed in manual exposure, when the aperture value changes when zooming or changing lenses has been added.
7. A new option has been added to orientation linked AF point to enable only the AF point to switch as you change orientation rather than both AF point/ AF area settings
8. A new option to continue to use the previously manually selected AF point as the initial starting AF point when switching to 61-point automatic selection has been added.
9. New customization of the Exposure metering and AF controls has been added for more flexibility.
10. The number of possibilities for controls to switch between one-shot AF and AI Servo AF using custom controls has been increased.
11. A function has been added to allow the playback and review of protected images only.
12. A phenomenon has been fixed in which the white balance may be disturbed by the timing of the shutter release when the drive mode is single shooting and a flash (E-TTL)is used.

Firmware Version 2.0.3 is for cameras with firmware Version 1.2.4 or earlier. If your camera's firmware is already Version 2.0.3, it is not necessary to update the firmware.
* The firmware update takes approximately seven minutes.

Notes:
1) Once the EOS-1D X camera is updated to Version 2.0.3, it cannot be restored to a previous firmware version (Version 1.0.2 through 1.2.4).
2) It is recommended that the latest application software*1 be used, once the EOS-1D X is updated to the new firmware Version 2.0.3 from older firmware (Versions 1.0.2 through 1.2.4). Certain previous versions of these applications do not support functions which are added by the new firmware.
You can download the latest application software from our Web site.
*1: EOS Utility version 2.13.30 or later
*1: Digital Photo Professional version 3.13.50 or later
3) Accompanying the enhancements to the functions, the instruction manual has also been revised. Users are asked to download both the latest firmware and the instruction manual. You can download the latest instruction manual from our Web site.
頁: [1]
查看完整版本: EOS-1D X Firmware Version 2.0.3 (17-Dec-2013)

重要聲明:本討論區是以即時上載留言的方式運作,Post76玩樂討論區對所有留言的真實性、完整性及立場等,不負任何法律責任。而一切留言之言論只代表留言者個人意 見,並非本網站之立場,讀者及用戶不應信賴內容,並應自行判斷內容之真實性。於有關情形下,讀者及用戶應尋求專業意見(如涉及醫療、法律或投資等問題)。 由於本討論區受到「即時上載留言」運作方式所規限,故不能完全監察所有留言,若讀者及用戶發現有留言出現問題,請聯絡我們。Post76玩樂討論區有權刪除任何留言及拒絕任何人士上載留言 (刪除前或不會作事先警告及通知 ), 同時亦有不刪除留言的權利,如有任何爭議,管理員擁有最終的詮釋權 。用戶切勿撰寫粗言穢語、誹謗、渲染色情暴力或人身攻擊的言論,敬請自律。本網站保留一切法律權利。權利。