就等如張個前級放大咗兩次，所以有機會出現唔夾聲同DELAY問題．解決辦法
１） 最理想當然買多對喇叭影音分家 ．
２） 換部有ＢＹＰＡＳＳ ＦＵＣＮＴＩＯＮ ＡＭＰ，聽歌
３） 重新SET 過ＥＱ，試吓ＥＱ可唔可解決，聲底唔夾同ＤＥＬＡＹ問題 ． my front speaker is 4 ohms and connect it through integrated amp, i.e.
AV amp (Yamaha) --> intergrated (NAD) ---> front speaker (4 ohm)
Do I need to set to 4 ohm in the AV amp for front speaker? or 8 ohm (because the integrated will do the job for 4 ohm front speaker)?
Please advise. Thanks. my front speaker is 4 ohms and connect it through integrated amp, i.e.
AV amp (Yamaha) --> intergrated (NAD) ---> front speaker (4 ohm)
Do I need to set to 4 ohm in the AV amp for front speaker? or 8 ...
kingking 發表於 2009-8-14 11:51 http://www.post76.com/discuss/images/common/back.gif
Don’t worry !!!
You no need set 4ohm in your AV AMP for front speaker .
Your’re AV AMP Ohms setting , should be base on your center , surround speaker Ohm # to set . 小弟用 marantz sr4600 pre-out 出 nad 326 都係會有少少 delay, 不過唔太明顯 {:6_136:} 小弟用 marantz sr4600 pre-out 出 nad 326 都係會有少少 delay, 不過唔太明顯 {:6_136:}
611323 發表於 2009-8-14 12:02 http://www.post76.com/discuss/images/common/back.gif
試吓調教吓個前置距離，可唔可改善 ？ 每一部機都有自己唔同聲底，如果你部合併機無BYPASS．
就等如張個前級放大咗兩次，所以有機會出現唔夾聲同DELAY問題．解決辦法
１） 最理想當然買多對喇叭影音分家 ．
２） 換部有ＢＹＰＡＳＳ ＦＵＣＮＴＩＯＮ ...
HP2210 發表於 2009-8-14 11:09 http://www.post76.com/discuss/images/common/back.gif
我部合併機無BYPASS...
bypass 係會bypass o左合併機份前級？
而家d聲梗係有d奇怪，不過已order o左小寶寶，當前置用
不過同對Quad好似唔同級數o甘 PRE-OUT 純後級就應該無問題, 而且可減低AV-AMP輸出壓力.
我部合併機無BYPASS...
bypass 係會bypass o左合併機份前級？
而家d聲梗係有d奇怪，不過已order o左小寶寶，當前置用
不過同對Quad好似唔同級數o甘
syeah 發表於 2009-8-14 18:27 http://www.post76.com/discuss/images/common/back.gif
無bypass即係過左兩份前級...實唔得啦{:1_331:} PRE-OUT 純後級就應該無問題, 而且可減低AV-AMP輸出壓力.
quntinchan 發表於 2009-8-31 16:49 http://www.post76.com/discuss/images/common/back.gif
係喎.....睇戲feel到好力左...{:1_264:}
頁:
1
[2]